1. Graphical User Interface off-line
FitLike
Graphical User Interface off-line

2. I- Introduction
In the future, all the component of FitLike will be independent (can work offline)
Useful to have simple GUI to do complex operations
Here we show how to use DisplayManager in that way

3. II- DisplayManager architecture
DisplayManager is based on a custom tab system
It gives data to the selected tab that will handle display tasks
We can also ask DisplayManager to give back data at any time
Send data to selected tab
Manage tab
DispersionTab
DisplayManager
ZoneTab
Send data displayed at the selected tab
BlocTab
BoxPlotTab

4. II- DisplayManager architecture
DisplayManager contains (now) three types of tab:
EmptyTab: default tab specified by « Untitled »
DispersionTab: tab for dispersion data specified by « Dispersion »
ZoneTab: tab for zone data specified by « Zone »
Rule: You can add any type of data to EmptyTab but not to others!
DispersionTab: accept only Dispersion object
ZoneTab: accept only Zone object

5. III- DisplayManager - constructor
After adding paths, DisplayManager is created using
DisplayManager should appears at this time

6. III- DisplayManager – add data
You need a RelaxObj array: here « relaxObj »
addPlot(DisplayManager, DataUnit, idxZone)
idxZone: a number or NaN (if all data)
Get dispersion data
Send data to the selected tab (untitled)

7. III- DisplayManager – apply mask
Maybe you want to apply a mask on some data and keep results in memory for further treatment

8. III- DisplayManager – apply mask
Double-click anywhere on the blue form to confirm the mask

9. III- DisplayManager – get data (Option1)
Your data object are handles:
Modify them in DisplayManager (with a mask) modify also your data in the workspace
You can get your data in your workspace

10. III- DisplayManager – get data (Option2)
You can also use the dedicated function (to have also idxZone)
Get data or
get data + idxZone

11. III- DisplayManager – get Legend
You can get the legend of the current tab
Warning: leg do not contain fit object legend!

12. III- DisplayManager – remove data
We want to remove a particular data from the selected tab
removePlot(DisplayManager, DataUnit, idxZone)
Warning²: If you delete a DataUnit in your workspace, it will be delete in all the tab!! (handle, handle and always handle)
Get data + idxZone
Remove first data

13. IV- DisplayManager – add/close tab
We want to open a new tab for new data
Now a new empty tab is available for data

14. IV- DisplayManager – add/close tab
We want to close a tab: right-click on any tab
Rule: you need to keep at least one tab (and the ‘+’ tab)