1. Timber Frame Panel with opening Typical panel comprises a series
of studs, top and bottom rails
and a sheet backing
Panel with opening

2. Sub-structure Slab on DPM Hardcore
Panels are nailed to the sole plate.
A sole plate sits on top of the blocks (on a DPC) and is fixed down to the floor or internal leaf of blocks...
Slab on DPM
Hardcore

3. Fixing panels
Platform for next panel

4. Detail - upper floor
Breather
paper
Section
Deck
Header
joist
Joist
Binder

5. Detail - roof Head binder
Trussed rafters are normally fixed at 600 centres. The head binder may not be necessary where trusses sit directly over the studs in the wall panel below.

6. Detail - Panel finish Plasterboard Vapour check inner lining
Breather paper - factory fitted
Plasterboard
inner lining
Vapour check
Insulation - between studs
End of Sequence