1. PROGRAMMING IN HASKELL
Type declarations and Modules
let y = Add (Val 1) (Mul (Val 2) (Val 3))
Based on lecture notes by Graham Hutton
The book “Learn You a Haskell for Great Good”
(and a few other sources)

2. Recap of Typeclasses
We have seen typeclasses, which describe classes of data where operations of a certain type make sense.
Look more closely at an example, Eq:
class Eq a where
(==) :: a -> a -> Bool
(/=) :: a -> a -> Bool
x == y = not (x /= y)
x /= y = not (x == y) 1

3. data TrafficLight = Red | Yellow | Green
Now – say we want to make a new type and make sure it belongs to a given typeclass. Here’s how:
data TrafficLight = Red | Yellow | Green
instance Eq TrafficLight where
Red == Red = True
Green == Green = True
Yellow == Yellow = True
_ == _ = False 2

4. instance Show TrafficLight where show Red = "Red light"
Now maybe we want to be able to display these at the prompt. To do this, we need to add this to the “show” class.
instance Show TrafficLight where
show Red = "Red light"
show Yellow = "Yellow light"
show Green = "Green light" 3

5. And finally, we can use these things:
ghci> Red == Red
True
ghci> Red == Yellow
False
ghci> Red `elem` [Red, Yellow, Green]
ghci> [Red, Yellow, Green]
[Red light,Yellow light,Green light] 4

6. Modules
So far, we’ve been using built-in functions provided in the Haskell prelude. This is a subset of a larger library that is provided with any installation of Haskell. (Google for Hoogle to see a handy search engine for these.)
Examples of other modules:
- lists
- concurrent programming
- complex numbers
- char
- sets
- …

7. This is a function in Data.List that removes duplicates from a list.
Example: Data.List
To load a module, we need to import it:
import Data.List 
All the functions in this module are immediately available:
numUniques :: (Eq a) => [a] -> Int  
numUniques = length . nub 
This is a function in Data.List that removes duplicates from a list.
function
concatenation

8. You can also load modules from the command prompt:
ghci> :m + Data.List
Or several at once:
ghci> :m + Data.List Data.Map Data.Set  
Or import only some, or all but some:
import Data.List (nub, sort) 
import Data.List hiding (nub) 

9. If duplication of names is an issue, can extend the namespace:
import qualified Data.Map
This imports the functions, but we have to use Data.Map to use them – like Data.Map.filter.
When the Data.Map gets a bit long, we can provide an alias:
import qualified Data.Map as M  
And now we can just type M.filter, and the normal list filter will just be filter.

10. ghci> intersperse '.' "MONKEY" "M.O.N.K.E.Y"
Data.List has a lot more functionality than we’ve seen. A few examples:
ghci> intersperse '.' "MONKEY"  
"M.O.N.K.E.Y"  
ghci> intersperse 0 [1,2,3,4,5,6]  
[1,0,2,0,3,0,4,0,5,0,6]
ghci> intercalate " " ["hey","there","guys"]  
"hey there guys"  
ghci> intercalate [0,0,0] [[1,2,3],[4,5,6],
[7,8,9]]  
[1,2,3,0,0,0,4,5,6,0,0,0,7,8,9]    9

11. ghci> transpose [[1,2,3],[4,5,6], [7,8,9]]
And even more:
ghci> transpose [[1,2,3],[4,5,6],
[7,8,9]]  
[[1,4,7],[2,5,8],[3,6,9]]  
ghci> transpose ["hey","there","guys"] ["htg","ehu","yey","rs","e"] 
ghci> concat ["foo","bar","car"]  
"foobarcar"  
ghci> concat [[3,4,5],[2,3,4],[2,1,1]]  
[3,4,5,2,3,4,2,1,1]    10

12. ghci> and $ map (>4) [5,6,7,8] True
And even more:
ghci> and $ map (>4) [5,6,7,8]  
True  
ghci> and $ map (==4) [4,4,4,3,4]  
False  
ghci> any (==4) [2,3,5,6,1,4]  
True  
ghci> all (>4) [6,9,10]  
True      11

13. A nice example: adding functions
Functions are often represented as vectors: 8x^3 + 5x^2 + x - 1 is [8,5,1,-1].
So we can easily use List functions to add these vectors:
ghci> map sum $ transpose [[0,3,5,9],
[10,0,0,9],[8,5,1,-1]]  
[18,8,6,17] 12

14. There are a ton of these functions, so I could spend all semester covering just lists.
More examples: group, sort, dropWhile, takeWhile, partition, isPrefixOf, find, findIndex, delete, words, insert,…
Instead, I’ll make sure to post a link to a good overview of lists on the webpage, in case you need them.
In essence, if it’s a useful thing to do to a list, Haskell probably supports it! 13

15. Examples: isAlpha, isLower, isSpace, isDigit, isPunctuation,…
The Data.Char module: includes a lot of useful functions that will look similar to python, actually.
Examples: isAlpha, isLower, isSpace, isDigit, isPunctuation,…
ghci> all isAlphaNum "bobby283"  
True  
ghci> all isAlphaNum "eddy the fish!"False 
ghci> groupBy ((==) `on` isSpace) 
"hey guys its me"  
["hey"," ","guys"," ","its"," ","me"] 14

16. The Data.Char module has a datatype that is a set of comparisons on characters. There is a function called generalCategory that returns the information. (This is a bit like the Ordering type for numbers, which returns LT, EQ, or GT.)
ghci> generalCategory ' '  
Space  
ghci> generalCategory 'A'  
UppercaseLetter  
ghci> generalCategory 'a'  
LowercaseLetter  
ghci> generalCategory '.'  
OtherPunctuation  
ghci> generalCategory '9'  
DecimalNumber  
ghci> map generalCategory " ¥t¥nA9?|"  
[Space,Control,Control,UppercaseLetter,DecimalNumber,OtherPunctuation,MathSymbol]  ] 15

17. There are also functions that can convert between Ints and Chars:
ghci> map digitToInt "FF85AB"  
[15,15,8,5,10,11]
ghci> intToDigit 15  
'f'  
ghci> intToDigit 5  
'5'   
ghci> chr 97  
'a'  
ghci> map ord "abcdefgh"  
[97,98,99,100,101,102,103,104]  16

18. Neat application: Ceasar ciphers
A primitive encryption cipher which encodes messages by shifted them a fixed amount in the alphabet.
Example: hello with shift of 3
encode :: Int -> String -> String  
encode shift msg = 
    let ords = map ord msg  
        shifted = map (+ shift) ords  
    in  map chr shifted   17

19. ghci> encode 3 "Heeeeey" "Khhhhh|" ghci> encode 4 "Heeeeey"
Now to use it:
ghci> encode 3 "Heeeeey"  
"Khhhhh|"  
ghci> encode 4 "Heeeeey"  
"Liiiii}"  
ghci> encode 1 "abcd"  
"bcde"  
ghci> encode 5 "Marry Christmas! Ho ho ho!”
"Rfww~%Hmwnxyrfx&%Mt%mt%mt&"   18

20. Decoding just reverses the encoding:
decode :: Int -> String -> String  
decode shift msg = 
encode (negate shift) msg    
ghci> encode 3 "Im a little teapot"  
"Lp#d#olwwoh#whdsrw"  
ghci> decode 3 "Lp#d#olwwoh#whdsrw"  
"Im a little teapot"  
ghci> decode 5 . encode 5 $ "This is a sentence"  
"This is a sentence"      19

21. Making our own modules
We specify our own modules at the beginning of a file. For example, if we had a set of geometry functions:
module Geometry  
( sphereVolume  
, sphereArea  
, cubeVolume  
, cubeArea  
, cuboidArea  
, cuboidVolume  
) where 

22. Then, we put the functions that the module uses:
sphereVolume :: Float -> Float  
sphereVolume radius = (4.0 / 3.0) * pi * 
(radius ^ 3)  
sphereArea :: Float -> Float  
sphereArea radius = 4 * pi * (radius ^ 2)  
cubeVolume :: Float -> Float  
cubeVolume side = cuboidVolume side side side  … 21

23. Note that we can have “private” helper functions, also:
cuboidVolume :: Float -> Float -> Float 
-> Float  
cuboidVolume a b c = rectangleArea a b * c 
cuboidArea :: Float -> Float -> 
Float -> Float  
cuboidArea a b c = rectangleArea a b * 2 + rectangleArea a c * 2 + rectangleArea c b * 2  
rectangleArea :: Float -> Float -> Float  
rectangleArea a b = a * b  22

24. Each will hold a separate group of functions. To load:
Can also nest these. Make a folder called Geometry, with 3 files inside it:
Sphere.hs
Cubiod.hs
Cube.hs
Each will hold a separate group of functions.
To load:
import Geometry.Sphere
Or (if functions have same names):
import qualified Geometry.Sphere as Sphere 23

25. module Geometry.Sphere ( volume , area ) where
The modules:
module Geometry.Sphere  
( volume  
, area  
) where  
volume :: Float -> Float  
volume radius = (4.0 / 3.0) * pi * (radius ^ 3)  
area :: Float -> Float  
area radius = 4 * pi * (radius ^ 2) 24

26. module Geometry.Cuboid ( volume , area ) where
volume :: Float -> Float -> Float -> Float  
volume a b c = rectangleArea a b * c  
…   25

27. Putting it together: Arithmetic Expressions
Consider a simple form of expressions built up from integers using addition and multiplication. 1 +  3 2

28. Using recursion, a suitable new type to represent such expressions can be declared by:
data Expr = Val Int
| Add Expr Expr
| Mul Expr Expr
For example, the expression on the previous slide would be represented as follows:
Add (Val 1) (Mul (Val 2) (Val 3))

29. Using recursion, it is now easy to define functions that process expressions. For example:
size :: Expr  Int
size (Val n) = 1
size (Add x y) = size x + size y
size (Mul x y) = size x + size y
eval :: Expr  Int
eval (Val n) = n
eval (Add x y) = eval x + eval y
eval (Mul x y) = eval x * eval y

30. The three constructors have types:
Note:
The three constructors have types:
Val :: Int  Expr
Add :: Expr  Expr  Expr
Mul :: Expr  Expr  Expr
Many functions on expressions can be defined by replacing the constructors by other functions using a suitable fold function. For example:
eval = fold id (+) (*)

31. Then edit in the other two, and find a way to test!
Exercise: Edit our simple expressions to support subtraction and division in eval as well.
Grab expression.hs from the schedule page for the code so far. After loading, you can use it:
ghci expression.hs
GHCi, version 7.6.3: (etc)
Loading (etc)
Ok, modules loaded: Expression.
*Expression> let y = Add (Val 1) (Mul (Val 2) (Val 3))
*Expression> eval y 7
*Expression> size y 3
Then edit in the other two, and find a way to test!

32. File I/O
So far, we’ve worked mainly at the prompt, and done very little true input or output. This is logical in a functional language, since nothing has side effects!
However, this is a problem with I/O, since the whole point is to take input (and hence change some value) and then output something (which requires changing the state of the screen or other I/O device.
Luckily, Haskell offers work-arounds that separate the more imperative I/O.

33. A simple example: save the following file as helloword.hs
main = putStrLn "hello, world"
Now we actually compile a program:
$ ghc --make helloworld  
[1 of 1] Compiling Main       
( helloworld.hs, helloworld.o )  
Linking helloworld ...     
$ ./helloworld  
hello, world  32

34. What are these functions?
ghci> :t putStrLn  
putStrLn :: String -> IO ()  
ghci> :t putStrLn "hello, world"  
putStrLn "hello, world" :: IO () 
So putStrLn takes a string and returns an I/O action (which has a result type of (), the empty tuple).
In Haskell, an I/O action is one with a side effect - usually either reading or printing. Usually some kind of a return value, where () is a dummy value for no return. 33

35. A more interesting example:
An I/O action will only be performed when you give it the name “main” and then run the program.
A more interesting example:
main = do  
    putStrLn "Hello, what's your name?”  
    name <- getLine  
    putStrLn ("Hey " ++ name ++ ", 
you rock!")   
Notice the do statement - more imperative style.
Each step is an I/O action, and these glue together. 34

36. More on getLine: ghci> :t getLine getLine :: IO String
This is the first I/O we’ve seen that doesn’t have an empty tuple type - it has a String.
Once the string is returned, we use the <- to bind the result to the specified identifier.
Notice this is the first non-functional action we’ve seen, since this function will NOT have the same value every time it is run! This is called “impure” code, and the value name is “tainted”. 35

37. nameTag = "Hello, my name is " ++ getLine
An invalid example:
nameTag = "Hello, my name is " ++ getLine 
What’s the problem? Well, ++ requires both parameters to have the same type.
What is the return type of getLine?
Another word of warning: what does the following do?
name = getLine    36

38. ghci> putStrLn "HEEY" HEEY
Just remember that I/O actions are only performed in a few possible places:
A main function
inside a bigger I/O block that we have composed with a do (and remember that the last action can’t be bound to a name, since that is the one that is the return type).
At the ghci prompt:
ghci> putStrLn "HEEY"  
HEEY     37

39. Note that <- is for I/O, and let for expressions.
You can use let statements inside do blocks, to call other functions (and with no “in” part required):
import Data.Char 
main = do  
    putStrLn "What's your first name?"  
    firstName <- getLine  
    putStrLn "What's your last name?"  
    lastName <- getLine  
    let bigFirstName = map toUpper firstName  
        bigLastName = map toUpper lastName  
    putStrLn $ "hey " ++ bigFirstName ++ " " ++ 
bigLastName ++ ", how are you?"    
Note that <- is for I/O, and let for expressions. 38

40. What is return?
Does NOT signal the end of execution! Return instead makes an I/O action out of a pure value.
main = do  
    a <- return "heck"  
    b <- return "yeah!"  
    putStrLn $ a ++ " " ++ b  
In essence, return is the opposite of <-. Instead of “unwrapping” I/O Strings, it wraps them. 39

41. Last example was a bit redundant, though – could use a let instead:
main = do
let a = ”heck"
b = "yeah"
putStrLn $ a ++ " " ++ b  
Usually, you’ll use return to create I/O actions that don’t do anything (but you have to have one anyway, like an if-then-else), or for the last line of a do block, so it returns some value we want. 40

42. Takeaway: Return in haskell is NOT like other languages.
main = do   
    line <- getLine  
    if null line  
        then return ()  
        else do  
            putStrLn $ reverseWords line              
main     
reverseWords :: String -> String  
reverseWords = unwords . map reverse . words 
Note: reverseWords = unwords . map reverse . words is the same as
reverseWords st = nwords (map reverse (words st)) 41

43. print (works on any type in show, but calls show first)
Other I/O functions:
print (works on any type in show, but calls show first)
putStr - And as putStrLn, but no newline
putChar and getChar
main = do  print True  
            print 2  
            print "haha"  
            print 3.2  
            print [3,4,3] 
main = do     
    c <- getChar  
    if c /= ' '  
        then do  
            putChar c  
            main  
        else return ()   42

44. More advanced functionality is available in Control.Monad:
import Control.Monad  
import Data.Char     
main = forever $ do  
    putStr "Give me some input: "  
    l <- getLine  
    putStrLn $ map toUpper l 
(Will indefinitely ask for input and print it back out capitalized.) 43

45. sequence: takes list of I/O actions and does them one after the other
Other functions:
sequence: takes list of I/O actions and does them one after the other
mapM: takes a function (which returns an I/O) and maps it over a list
Others available in Control.Monad:
when: takes boolean and I/O action. If bool is true, returns same I/O, and if false, does a return instead 44

46. System Level programming
An example:
System Level programming
Scripting functionality deals with I/O as a necessity.
The module System.Environment has several to help with this:
getArgs: returns a list of the arguments that the program was run with
getProgName: returns the string which is the program name
(Note: I’ll be assuming you compile using “ghc –make myprogram” and then running “./myprogram”.
But you could also do “runhaskell myprogram.hs”.) 45

47. An example: import System.Environment import Data.List main = do
args <- getArgs
progName <- getProgName
putStrLn "The arguments are:"
mapM putStrLn args
putStrLn "The program name is:"
putStrLn progName 46

48. $ ./arg-test first second w00t "multi word arg" The arguments are:
The output:
$ ./arg-test first second w00t "multi word arg"
The arguments are:
first
second
w00t
multi word arg
The program name is:
arg-test 47