1. Thank You For Purchasing Coeur Designs 11” Shower Extension

2. Package Contents

3. 1.Shower Extension 2.Teflon Tape 3.Screen Washer 4.Reducer Washer

4. Prior To Installation

5. This is a Flow Restricting Washer and Should Be Removed From The Extension Prior to Installation Unless Low Water Flow is Desired

6. Remove This Low Flow Washer Unless Low flow is Desired

7. Insert This Screen Washer into the Six Sided Nut Prior to Beginning Installation of Extension

8. Installation

9. Remove Your Existing Shower Head From Shower Pipe

10. Remove any old Teflon Tape from Shower Pipe Threads

11. Add 10-15 Wraps of New Teflon Tape on Shower Pipe Threads

12. Do Not use Extension Tube as a Lever When Tightening to Shower Pipe

13. Screw Six Sided Nut onto the Shower Pipe

14. Turn Extension Until Snug on Shower Pipe and at the 12 O'clock Position

15. Add Five to Ten Wraps of Teflon Tape to Shower Head End of Extension

16. Hand Tighten Shower Head onto Extension

17. Raise Shower Head To Desired Position and Tighten Upper and Lower Wing Nuts

18. If Horizontal Position is Desired Use Pliers to Tighten Lower Wing Nut

19. Your Installation is Complete