1. Routers and Routing Basics Review
CCNA 2 v3
JEOPARDY
Routers and Routing Basics
Review

2. Acronyms
Router
Potpourri
Interface
External
Ports
A la Mode
Final Jeopardy
100
100
100
100
100
100
200
200
200
200
200
200
300
300
300
300
300
300
400
400
400
400
400
400
500
500
500
500
500
500

3. Acronyms 100
IOS
A: What is Internetwork Operating System?

4. Acronyms 200
POST
A: What is the Power On Self Test?

5. Acronyms 300
NVRAM
A: What is Non-Volatile Random Access Memory?

6. Acronyms 400
MOTD
A: What is the Message of the Day?

7. Acronyms 500
VTY
A: What are Virtual Terminal?

8. Router 100
Routing tables are found here.
A: What is RAM?

9. Stores a startup configuration file even
Router 200
Stores a startup configuration file even
when the power is off.
A: What is NVRAM?

10. Router 300
Location of a running configuration file
A: What is RAM?

11. Router 400
Post instructions are stored here.
A: What is ROM?

12. IOS image on a router by default is located here
A: What is Flash memory?

13. Potpourri 100
This command is used to move from the interface configuration mode to the global configuration mode.
What is Exit?

14. What is End? (also Ctrl-Z)
Potpourri 200
This command exits from any configuration mode back to privileged EXEC mode.
What is End? (also Ctrl-Z)

15. The command to disable an interface.
Potpourri 300
The command to disable an interface.
What is Shutdown?

16. Potpourri 400 Data enters and exits a router through these.
What are interfaces?

17. The default number of previous commands stored in the history buffer
Potpourri 500
The default number of previous commands stored in the history buffer
What is 10?

18. Interface 100 Enter this command to assign an address to an interface.
What is ip address <ip address> <netmask>?

19. Enter this command to enable an interface.
What is no shutdown?

20. Enter this command to set a DCE serial port’s signaling rate.
Interface 300
Enter this command to set a DCE serial port’s signaling rate.
What is clock rate 56000?

21. Interface 400
This command allows one to clearly identify an interface.
What is the description command?

22. What is interface serial 0? (or interface serial 0/0)
From global configuration mode, this command allows one to configure a router’s first serial interface.
What is interface serial 0? (or interface serial 0/0)

23. External Ports 100
The best port for router configuration and troubleshooting.
A: What is the Console port?

24. External Ports 200 This type of port is used for WAN connections.
A: What is a Serial port?

25. External Ports 300 This 8-pin port connects to a 100mbps LAN.
A: What is a Fast Ethernet port?

26. External Ports 400
Use this port to attach a modem for dial-in access to a router.
A: What is the AUXiliary port?

27. External Ports 500
This adapter is used to connect a console cable to a PC serial port.
A: What is an RJ-45 to DB-9 adapter?

28. What is Global configuration mode?
A la Mode 100
Chicago(config)#
What is Global configuration mode?

29. What is privileged EXEC mode?
A la Mode 200
Bucki#
What is privileged EXEC mode?

30. A la Mode 300
Smart(config-router)#
What is Router configuration mode?

31. A la Mode 400
Marina(config-line)#
What is Line configuration mode?

32. What is Interface configuration mode?
A la Mode 500
Batavia(config-if)#
What is Interface configuration mode?

33. Final Jeopardy
The three memory components that retain their contents when no power is present.
A: What are ROM, FLASH, and NVRAM?