1. US-HiLumi – Shipping Post Assembly Status
Don Arnold
US-HiLumi Status
14 March 2019

2. Shipping Post – New Components
Typical Shim
Varying Sizes
From 1.5 mm
To 0.13 mm
Shipping Post
Support Plate
Push Rod
3/14/2019
D.Arnold/US-HiLumi Shipping

3. Shipping Post – U Bracket and Additions
What is the Maximum Range?
What loads can the bracket take?
Materials?
Can mounting holes be added?
Proposed Ring Attachment
3/14/2019
D.Arnold/US-HiLumi Shipping

4. Shipping Post – Piston/Jack Travel - Ranges
3/14/2019
D.Arnold/US-HiLumi Shipping

5. Shipping Post – Piston/Jack Travel - Final
3/14/2019
D.Arnold/US-HiLumi Shipping

6. Shipping Post – Loading on U-Bracket
3/14/2019
D.Arnold/US-HiLumi Shipping

7. Shipping Post – Up Position
3/14/2019
D.Arnold/US-HiLumi Shipping

8. Shipping Support Plate – Loading on U-Bracket
3/14/2019
D.Arnold/US-HiLumi Shipping

9. Shipping Support Plate – Up Position
See Next Slide for
Shim Detail
3/14/2019
D.Arnold/US-HiLumi Shipping

10. Shipping Post Shim – Measuring Gap
Support Plate
Measure Gap
3/14/2019
D.Arnold/US-HiLumi Shipping

11. Shipping Post Shims – Additional Qty. - TBD
Typical Shim
Varying Sizes
From 1.5 mm
To 0.13 mm
3/14/2019
D.Arnold/US-HiLumi Shipping

12. Shipping – Push Rod Mounting Position – Opt 1
3/14/2019
D.Arnold/US-HiLumi Shipping

13. Shipping – Jack Piston Up – Opt. 2
3/14/2019
D.Arnold/US-HiLumi Shipping

14. Shipping Post – Remove Jack and Add Cover(s)
3/14/2019
D.Arnold/US-HiLumi Shipping

15. Additional Sides – From January 18th
3/14/2019
D.Arnold/US-HiLumi Shipping

16. Shipping Post – Final Shipping Configuration
3/14/2019
D.Arnold/US-HiLumi Shipping

17. Shipping Post – Jack Fit-up & Shim Sequencing
#3 Fixed
#1 Sliding
#2 Fixed
3/14/2019
D.Arnold/US-HiLumi Shipping

18. Shipping Post – Comments and Questions
Is there a procedure on the operation of the jack system?
Are the clearances, dimensions, and stroke of the jack okay?
Are there any dimensional drawings available for the top portion of the shaft in the jack?
Any obstructions or other assembly fixturing I’m missing?
Operational safety requirements?
Documentation requirements?
Naming Conventions?
Shim Sizes, to start, will be 1.5, 1.0, 0.5, and 0.13 mm.
3/14/2019
D.Arnold/US-HiLumi Shipping