2. VERTICAL MACHINES NEXEEN – V100 TO NEXEEN – V200 Note: MODEL
Specifications
UNIT A B
Screw Diameter mm 30 35 40
Injection Pressure
kg/cm2
1146
842
1165
892
Shot Size (Theoretical)
cm³ 95
130
155
207
202
263
Max Shot Weight (PS) gm 60
100
150
200
Screw Speed
rpm
0-200
No. Of Temperature Control
zone 4 5
Material Hopper Capacity - 10 20
Clamping Force
ton 50
Opening Force
8.3 13
Max. Mold Size (L×W) Mm
260×280
280×280
340×340
Opening Stroke
210
290
320
Max. Mold Height
260
295
350
Min. Mold Height
135
Max Open Daylight
470
585
670
Ejector Force
1.3 2
Ejector Stroke 70
Max. Hydraulic Pressure
140
Oil Reservoir Capacity
ltr
220
Pump Motor kW
3.72
5.6
7.45
Barrel Heating Power
6.1
Machine Weight
1.2
1.5
Machine Dimension (L×W×H) m
2×1.1×2.8
2×1.1×2.9
2.4×1.2×3
Note:
We use rexroth solenoid valves in our machines.
All machines are available with proportional valve / variable pump / servo motor
Actual shot weight will be varied to various materials, above given data is subject to change.

3. VERTICAL MACHINES NEXEEN – V300 AND NEXEEN – V500 Note: MODEL
Specifications
UNIT A B
Screw Diameter mm 35 40
50 / 55
Injection Pressure
kg/cm2
1165
892
965
Shot Size (Theoretical)
cm³
298
389
638
Max Shot Weight (PS) gm
200
300
500
Screw Speed
rpm
0-200
No. Of Temperature Control
zone 5 6
Material Hopper Capacity - 20 30
Clamping Force
ton 60 70
Opening Force 13
Max. Mold Size (L×W) Mm
340×340
Opening Stroke
320
430
Max. Mold Height
350
400
Min. Mold Height
135
233
Max Open Daylight
670
830
Ejector Force 2
Ejector Stroke
Max. Hydraulic Pressure
140
Oil Reservoir Capacity
ltr
220
Pump Motor kW
7.45
11.20
Barrel Heating Power
6.1
8.3
Machine Weight
2.5
Machine Dimension (L×W×H) m
2.4×1.2×3
2.6×1.2×3.7
Note:
We use rexroth solenoid valves in our machines.
All machines are available with proportional valve / variable pump / servo motor
Actual shot weight will be varied to various materials, above given data is subject to change.

4. T-slot with screw holes
HORIZONTAL MACHINES
NEXEEN – 85 TO
NEXEEN – 130
MODEL
NEXEEN-85
NEXEEN-100
NEXEEN-130
INJECTION UNIT
UNIT A B C
Screw Diameter mm 32 35 38 42 45
Screw L/D Ratio 22
20.1
18.5
20.3
18.4 24
Shot Size (Theoretical)
cm³
133
160
190
163
193.2
235
226
277
318
Injection Weight (PS)
GMS
121
146
173
148
176
214
206
252
289
Injection Pressure
Mpa
203
170
144
219
184
152
208
171
149
Screw Speed
rpm
225
210
185
CLAMPING UNIT
Clamp Tonnage KN
800
900
1300
Toggle Stroke
320
350
380
Tia Bar Diameter 60 65 70
Space b/w Tie Bars
360×340
370×370
420×420
Max. Mold Height
450
Min Mold Height
150
Ejector Stroke 90
120
140
Ejector Tonnage 30 50
OTHERS
Max. Pump Pressure 16
Pump Motor Power KW 11 13
Heater Power
6.5
7.5 8
Machine Dimension
(L×W×H) m
3.9×1.2×1.8
4.3×1.3×2.0
4.6×1.5×2.1
Machine Weight t
2.8
3.4 4
Screw
T-slot with screw holes
Cylinder
Double carriage
Note:
This is T-slot series.
Platens consist with T-slot and screw holes.
Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used.
All machines are available with proportional valve / variable pump / servo motor
Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance
Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS)
Under normal condition, specifications and parameters may be improved without notification.
When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output.

5. T-slot with screw holes
HORIZONTAL MACHINES
NEXEEN – 170 TO
NEXEEN – 260
MODEL
NEXEEN-170
NEXEEN-220
NEXEEN-260
INJECTION UNIT
UNIT A B C
Screw Diameter mm 42 45 50 55 60
Screw L/D Ratio
23.6 22
19.8
24.4 20 24
20.3
Shot Size (Theoretical)
cm³
311
357
441
397
490
593
592
704
826
Injection Weight (PS)
GMS
283
325
402
362
446
540
539
641
752
Injection Pressure
Mpa
203
177
143
207
168
138
202.3
170
144.9
Screw Speed
rpm
180
155
220
CLAMPING UNIT
Clamp Tonnage KN
1600
2200
2600
Toggle Stroke
435
475
Tia Bar Diameter 80 90 95
Space b/w Tie Bars
470×470
520×520
570×570
Max. Mold Height
520
560
600
Min Mold Height
200
Ejector Stroke
140
150
Ejector Tonnage 70
Ejector Number
Nos. 5
OTHERS
Max. Pump Pressure 16
Pump Motor Power KW
18.5 30
Heater Power
12.5 14 19
Machine Dimension
(L×W×H) m
5.1×1.5×2.2
5.7×1.6×2.3
6.2×1.5×2.2
Machine Weight t 6 7
8.3
Screw
T-slot with screw holes
Cylinder
Double carriage
Note:
This is T-slot series.
Platens consist with T-slot and screw holes.
Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used.
All machines are available with proportional valve / variable pump / servo motor
Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance
Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS)
Under normal condition, specifications and parameters may be improved without notification.
When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output.

6. T-slot with screw holes
HORIZONTAL MACHINES
NEXEEN – 290 TO
NEXEEN – 400
MODEL
NEXEEN-290
NEXEEN-350
NEXEEN-400
INJECTION UNIT
UNIT A B C
Screw Diameter mm 55 60 65 70 75 80
Screw L/D Ratio 24 22
20.3
21.5 20
18.7
21.4
18.8
Shot Size (Theoretical)
cm³
676
805
945
1161
1226
1407
1324
1520
1729
Injection Weight (PS)
GMS
615
733
860
1057
1205
1383
1573
Injection Pressure
Mpa
202.3
170
144.9
195
168
146
199
173
152
Screw Speed
rpm
220
160
CLAMPING UNIT
Clamp Tonnage KN
2900
3500
4000
Toggle Stroke
590
670
710
Tia Bar Diameter
100
110
120
Space b/w Tie Bars
620×620
710×630
760×670
Max. Mold Height
630
780
Min Mold Height
200
260
250
Ejector Stroke
150
Ejector Tonnage 90
Ejector Number
Nos. 5 9
OTHERS
Max. Pump Pressure 16
Pump Motor Power KW 30 37
Heater Power 19
24.5 26
Machine Dimension
(L×W×H) m
6.3×1.7×2.4
7.3×1.8×2.2
7.3×1.96×2.41
Machine Weight t
9.3
12.5
14.2
Screw
T-slot with screw holes
Cylinder
Double carriage
Note:
This is T-slot series.
Platens consist with T-slot and screw holes.
Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used.
All machines are available with proportional valve / variable pump / servo motor
Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance
Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS)
Under normal condition, specifications and parameters may be improved without notification.
When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output.

7. T-slot with screw holes
HORIZONTAL MACHINES
NEXEEN – 450
AND
NEXEEN – 550
MODEL
NEXEEN-450
NEXEEN-550
INJECTION UNIT
UNIT A B C D
Screw Diameter mm 75 80 85 90 95
Screw L/D Ratio
21.3 20
18.8 23
21.1
19.5
Shot Size (Theoretical)
cm³
1679
1910
2156
2187
2468
2767
3082
Injection Weight (PS)
GMS
1528
1738
1962
1990
2246
2518
2805
Injection Pressure
Mpa
195
172
152
188
167
149
134
Screw Speed
rpm
155
150
CLAMPING UNIT
Clamp Tonnage KN
4500
5500
Toggle Stroke
760
900
Tia Bar Diameter
130
Space b/w Tie Bars
800×720
900×820
Max. Mold Height
800
850
Min Mold Height
300
350
Ejector Stroke
200
250
Ejector Tonnage
110
Ejector Number
Nos. 13
OTHERS
Max. Pump Pressure 16
Pump Motor Power KW 45 55
Heater Power 34 36
Machine Dimension
(L×W×H) m
7.6×1.9×2.3
9.3×2.1×2.4
Machine Weight t
Screw
T-slot with screw holes
Cylinder
Double carriage
Note:
This is T-slot series.
Platens consist with T-slot and screw holes.
Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used.
All machines are available with proportional valve / variable pump / servo motor
Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance
Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS)
Under normal condition, specifications and parameters may be improved without notification.
When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output.

8. T-slot with screw holes
HORIZONTAL MACHINES
NEXEEN – 650
AND
NEXEEN – 750
MODEL
NEXEEN-650
NEXEEN-750
INJECTION UNIT
UNIT A B C D
Screw Diameter mm 85 90 95
100
105
110
Screw L/D Ratio
22.3 21
19.9
18.9
23.2 22 19
Shot Size (Theoretical)
cm³
2303
2582
2877
3188
2868
3195
3903
4283
Injection Weight (PS)
GMS
2096
2350
2618
2901
2610
2907
3552
3898
Injection Pressure
Mpa
206
184
164
149
195
175
143
131
Screw Speed
rpm
125
130
CLAMPING UNIT
Clamp Tonnage KN
6500
7500
Toggle Stroke
930
1000
Tia Bar Diameter
160
165
Space b/w Tie Bars
960×880
1000×940
Max. Mold Height
900
Min Mold Height
350
400
Ejector Stroke
260
300
Ejector Tonnage
200
Ejector Number
Nos.
OTHERS
Max. Pump Pressure 16
Pump Motor Power KW
30+30
30+37
Heater Power
37.2 49
Machine Dimension
(L×W×H) m
9.6×2.4×2.7
10.6×2.6×2.8
Machine Weight t 32 39
Screw
T-slot with screw holes
Cylinder
Double carriage
Note:
This is T-slot series.
Platens consist with T-slot and screw holes.
Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used.
Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance
Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS)
Under normal condition, specifications and parameters may be improved without notification.
When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output.

9. NEXEEN MACHINES NOW A BETTER WAY TO MOLD KNOW US OUR COMMITMENT
Shreeji Engineering is one the leading manufacturers of Plastics Injection Moulding Machines in India. With our focus on building a qualitative and cost effective injection molding machines, we can offer the most economic solution in this industry. Nexeen plastic injection moulding machines are always a step ahead with the integration of latest features like errorless precision, smart control panel and cutting-edge compact designs.
Innovation with Quality
Performance and Reliability
Precision based design
Service towards satisfaction

10. Shreeji Engineering
Plot no. G-1825, K-2 Road,
Opp. Shree Ram hospital,
Kishan Gate. Taluka: Lodhika.
Dist.: Rajkot. Pin Code: