1. PANDA Cryostat and Yoke
Status of work
BINP, Sergey Pivovarov, Panda magnet meeting at GSl, September 08, 2015

2. Yoke, Platform and Frame

3. BINP received the specification of Yoke, Platform and Frame of PANDA detector on May According this specification we began work with BINP design department, technology department, BINP workshop and Russian plants.

4. 3D model of the Yoke, Platform and Frame .

5. We carried out a few meetings with staff of Russian plants
We carried out a few meetings with staff of Russian plants. As result we prepared assembly drawings of the one octant of Yoke with all requirement.

6. Assembly drawing of the octant of Yoke

7. Assembly drawing of the octant of Yoke

8. According this drawings the plant sent to BINP a offers
According this drawings the plant sent to BINP a offers. Schedule of manufacturing and delivery of Yok:   Start of works Design works till Purchase raw material and instruments from till Manufacturing from till Tests in Novosibirsk side Delivery to GSI Assembly and tests in GSI side

9. Manufactured assembly drawings of one octant are ready.
Conclusion
Manufactured assembly drawings of one octant are ready.
Cost of Yoke, Platform and Frame is estimated.
The cost is 3647 KEuro with exchange rate of Ruble/Euro equal 65.
We need to sign of contract with FAIR to continue the design work, prepare a documentation for tenders and etc.
We suggest to sign of contract with FAIR only for design work that don’t delay the project.

10. Cryostat and Valve Box

11. 3D model of the Cryostat and Valve Box.

12. Plan of work on September, 2015:
Specification of Cryostat is ready.
Cryogenic scheme should be approved together with BINP.
Instrumentation should be approved together with BINP.
Heat loads should be approved together with BINP after final design.
Preliminary assembling drawings of Cryostat are prepared.
Preliminary technologic work is made.
Manufacture and tests of Cryostat will be made at BINP.

13. Assembly drawing of the Cryostat

14. Assembly drawing of the Cryostat

15. Cost of Cryostat with Valve Box is estimated.
Conclusion
Cost of Cryostat with Valve Box is estimated.
The cost is 2778 KEuro with exchange rate of Ruble/Euro equal 65.
All instrumentation we plan purchase in European companies
The drawings and valve Box will be approved by third side.
We need to sign of contract with FAIR to continue the design work, prepare a documentation for tenders and etc.
We suggest to sign of contract with FAIR only for design work that don’t delay the project.
We will pleasure to see you in our Institute in the nearest time to see our production.

16. Thank for you attention!