1. CCNA 1 v3.1 Module 8 Ethernet Switching

2. Purpose of This PowerPoint
This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.1.
It was created to give instructors a PowerPoint to take and modify as their own.
This PowerPoint is:
NOT a study guide for the module final assessment.
NOT a study guide for the CCNA certification exam.
Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.

3. To Locate Instructional Resource Materials on Academy Connection:
Go to the Community FTP Center to locate materials created by the instructor community
Go to the Tools section
Go to the Alpha Preview section
Go to the Community link under Resources
See the resources available on the Class home page for classes you are offering
Search
Contact your parent academy!

4. Objectives

5. Layer 2 Bridging

6. Bridges

7. Switch Operation

8. Full Duplex

9. Network Latency

10. Switch Modes
Store and Forward - A switch receives the entire frame before sending it out the destination port.
Cut-Through - A switch starts to transfer the frame as soon as the destination MAC address is received.

11. Spanning-Tree Operation

12. STP States

13. Types of Networks

14. Collisions in Collision Domain

15. Collision Domain Segmentation

16. Increasing a Collision Domain

17. Four Repeater Rule

18. Round-Trip Delay Calculation

19. Layer 1 Devices Extend Collision Domains

20. Limiting the Collision Domains

21. Segmenting a Collision Domain with a Bridge

22. Broadcasts in a Bridged Environment

23. Effects of Broadcast Radiation on Hosts in a IP Network

24. Average Number of Broadcasts and Multicasts for IP

25. Broadcast Domain Segmentation

26. Data Flow Through a Network

27. Segments

28. Summary