1. <September, 2010>
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [Resolution of TG6 Draft D0 comment S7-399]
Date Submitted: [9 September, 2010]
Source: [Ranjeet Kumar Patro] Company [Samsung Electronics]
Address [Bagmane Lakeview, Block ´B´, No. 66/1, Bagmane Tech Park, C.V. Raman Nagar, Byrasandra, Bangalore, Karnataka, , India]
Voice:[ ], FAX: [ ],
Re: [Proposed Resolution of D0 Comment S7-399]
Abstract: [Description of document contents.]
Purpose: [Description of what the author wants P to do with the information in the document.]
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
NOTE: Update all red fields replacing with your information; they are required. This is a manual update in appropriate
fields. All Blue fields are informational and are to be deleted. Black stays. After updating delete this box/paragraph.
<Ranjeet Kumar Patro>, <Samsung Electronics>

2. Proposed Resolution of D0 Comment S7-399
<month year>
doc.: IEEE <doc#>
<September, 2010>
Proposed Resolution of D0 Comment S7-399
<Ranjeet Kumar Patro>, <Samsung Electronics>
<author>, <company>

3. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
<September, 2010>
D0 Comment S7-399
Comment: mGT_nominal is defined as Allocation Slot Length/10. What is the basis used for setting the denominator to 10?
Commentators proposed resolution:
Must be satisfied: No
<Ranjeet Kumar Patro>, <Samsung Electronics>
<author>, <company>

4. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
<September, 2010>
Proposed Resolution
Resolution: Accept
Description: The formula to calculate mGT_nominal has been given in page 104, line 7. It is more generic to represent mGT_nominal as a function of the parameter Dn (allowed clock drift of a node or hub relative to an ideal or nominal clock). The parameter Dn can be different for different nodes. Recommended to use the formula than the predefined value = Allocation Slot Length/10.
<Ranjeet Kumar Patro>, <Samsung Electronics>
<author>, <company>