1. Team 12 DINING DOLLARS RACHEL RAY GORDON RAMSEY PAULA DEAN BOBBY FLAY
Our goal is to work as a team to design a launcher that lands a projectile on specific sections of a scoring board to score points. The device must fit within a 25x25x40 cm box. The projectile used is an 11.5 gram poker chip, but it can be modified up to 50 grams. Our project must use a trigger to fire the projectile.

2. Idea Generation & selection
Spring
Few variables to calculate
Consistent Distance Traveled
Design relies on spring
Ramp
Simplest Idea
Straightforward Design
Difficult to nail down consistent trajectory
Motor
Powerful and Precise
Powering the motor
Motor would need varying speeds
Final Idea :
SPRING

3. Final Design Idea Dimensions: Width - 5 in (12.70 cm)
Length - 6 in (15.24 cm)
Height - 1.86 in (4.72 cm)
Top View
Launch Chamber
Material - ABS
Aim Piece
Material - ABS
Launch Block
Material - ABS
Swivel
Material - ABS
Spring
Material - Steel
Pin/Trigger
Material - ABS
Bottom View

4. Timelines 11/3/18 – Work on Presentation
Planning Timeline
11/3/18 – Work on Presentation
11/8/18 – Present Presentation, Complete Safety Quiz, Member Evaluation
11/10-11/11- Work on construction of the device
11/17-11/18 – Continue work on the device
11/24/18 – Device should be able to launch properly and consistently
11/27/18 – Present Device with significant progress completed on device
11/29/18 – Complete Status Check 
12/04/18 – EF Game Test, Improvement summary, Project Peer Feedback