1. Characteristics of Ideal Working Fluid in Vapour Power Cycle

2. Objectives Why characteristics of working fluid are important?
Characteristics of ideal working fluid in vapour power cycle

3. Why characteristics of working fluid are important?
We all know any thermodynamic power cycle depends on a working fluid for the transfer of heat from the source to the point where it is converted to some useful work.

4. Picking a working fluid for any vapour power cycle is not a random decision, since in case of any malfunction caused by it can lead to danger to human life and can cause huge operation and maintenance cost.

5. Characteristics of ideal working fluid in vapour power cycle

6. 1. The fluid should have high critical temperature so that the saturation pressure at the maximum permissible temperature is relatively low. It should have a large enthalpy of evaporation at that pressure.

7. 2. The saturation pressure at the temperature of heat rejection should be above atmospheric pressure so as to avoid the necessity of maintaining vacuum in the condenser.

8. 3. The specific heat of the liquid should be small so that little heat transfer is required to raise the liquid to the boiling point.

9. 4. The saturated vapour line of the T-s diagram should be steep, very close to turbine expansion process so that excessive moisture does not appear during expansion.

10. 5. The freezing point of the liquid should be below room temperature, so that it does not get solidified while flowing through the pipelines.

11. 6. The fluid should be chemically stable and should not contaminate the material of construction at any temperature.

12. 7. The fluid should be nontoxic, noncorrosive, not excessively viscous, and low in cost.

13. Thank You