1. OWS + SureView Integration

2. ENABLE SUREVIEW IN OWS
From the Channel Partner Page (Orange Banner Bar) you will see a list of your customers.
Click the MANAGE button to access the customer.
From the Channel Partner Page (Orange Banner Bar) you will see a list of your customers.
Choose “Manage” to access the customer.

3. ENABLE SUREVIEW IN OWS
On the Manage Account screen, select SureView Integration
From the manage account screen, select SureView Integration.

4. ENABLE SUREVIEW IN OWS
On the SureView Setup Page, enter the IP Address and Port of the Sureview Server. To define the SMTP port, type a colon after the IP and enter the port. If you enter an IP address, without defining the port the system will default to port 25.
Click Save.
And then click Account to return to the previous menu
From the SureView Setup Page, enter the IP Address and Port of the Sureview Server. If you simply enter an address, without defining the port the system will default to port 25. If the SMTP port is on an alternate port, just put a colon after the IP and then enter the port.
Press Save when complete.
Then click Account to return to the previous menu

5. ENABLE SUREVIEW IN OWS
From the Channel Partner Page (Orange Banner Bar) you will see a list of your customers.
Click the SELECT button to access the customer.
From the Channel Partner Page (Orange Banner Bar) you will see a list of your customers.
Choose “Select” to access the customer.

6. SUREVIEW SETUP
From the customer page, under Recorder Management, select Recorders
Log into OWS and Select the Customer.
From the customer page, select Recorder Management and Recorders

7. SUREVIEW SETUP Find the recorder and then click the EDIT button
Find the recorder and select Edit

8. SUREVIEW SETUP
Click General Settings, then enter the Identifier captured during the SureView setup into the SureView Integration ID.
Select Save.
Click General Settings, then Enter the Identifier captured during the Sureview setup into the Sureview Integration ID.
Select Save.

9. ENABLE SUREVIEW IN OWS
From the Channel Partner Page (Orange Banner Bar) you will see a list of your customers.
Click the SELECT button to access the customer.
From the Channel Partner Page (Orange Banner Bar) you will see a list of your customers.
Choose “Select” to access the customer.

10. ENABLE SUREVIEW IN OWS
Choose the recorder that will be sending the alerts to SureView and click the CONNECT button.
Choose the recorder that will be sending the alerts to SureView and select Connect.

11. ENABLE SUREVIEW IN OWS
Once connected to the recorder, select the settings gear in the upper right.
Once connected to the recorder, select the settings gear in the upper right.

12. ENABLE SUREVIEW IN OWS
From the General Configuration Page, select “Web Services”
From the General Configuration Page, select “Web Services”

13. ENABLE SUREVIEW IN OWS
From the Web Services Page, under Web Services Account Status is the Device ID. This is the ID that you enter into the IP/Host field in SureView.
Once you have recorded the Device ID, Select “Cameras” under General Configuration. This will take you to the camera configuration page.
From the Web Services Page, Under Web Services Account Status is the Device ID. This is the ID that you enter into the IP/Host field in SureView
Once you have recorded the Device ID, Select “Cameras” under General Configuration. This will bring us to the camera configuration page

14. ASCERTAIN OPENEYE CAMERA IDs
From the Camera Settings Page, select a camera. You’ll see the integration ID listed. These are the values you need to use in the Input field in the Cameras menu in Sureview
From the Camera Settings Page, Select a camera. You’ll see the integration ID listed. These are the values you need to use in the Input field in the Cameras menu in Sureview

15. CREATING ALERTS IN OWS
Return to the Customer page and from the Alerts menu select Alert Rules.
From the Customer page we visited previously, select Alerts and Alert Rules.

16. CREATING ALERTS IN OWS
From the Alert Rules page, you’ll see the existing alerts.
Click Add New rule which will launch the Alert Rules Wizard.
From the Alert Rules page, you’ll see the existing alerts. Click Add New rule which will launch the Alert Rules Wizard.

17. CREATING ALERTS IN OWS
When the new alert rule wizard pops up, select an alert type.
Select Next to continue.
When the new alert rule wizard pops up, first select an alert type. Select Next to Continue

18. CREATING ALERTS IN OWS
Give the Alert a name and description, and then click Create to continue.
Give the Alert a name and description, then press Create to continue.

19. CREATING ALERTS IN OWS
This screen is where you define the rule and its timing sequences. This is also where you can elect to send the alert to SureView.
Complete the Timeline and Motion Duration settings. Then select the Send to SureView check box and then click Save.
Once named, you will be taken to the Rule definition portion of the alert. This is where you define the rule and it’s timing sequences. This is also where you can choose to send the alert to SureView.
Complete the Timeline and Motion Duration Settings. Then Choose the box “Send to SureView” and select Save

20. Event Type Configuration In SureView
When OWS is configured to send alerts on Motion, it sends an alert both on Motion On and Motion Off.
In order to save on storage space, you will want to configure a Motion Off event in SureView for every Motion On event, and set the Motion Off event to Auto Handle.
When OWS is configured to send alerts on Motion, it sends an alert both on Motion On and Motion Off. In order to save on storage space, you will want to configure a Motion Off event in SureView for every Motion On event, and set the Motion Off event to Auto Handle.

21. Event Type Configuration in Sureview
In your SureView account:
Under System > Event Type Configuration, select OpenEye OWS.
Then select the Auto Handle check box under Motion Off. This will set newly created Motion Off events to automatically clear themselves.
Under System > Event Type Configuration, select OpenEye OWS. Then select the Auto Handle check box under Motion Off. This will set newly created Motion Off events to automatically clear themselves.

22. Configuring Pre-Alarm in SureView
Create Alarm
Add Alarm Action
Check box for Pre-Alarm
Set number of seconds

23. Configuring Pre-Alarm in SureView

24. Configuring Pre-Alarm in SureView

25. Configuring Pre-Alarm in SureView
Pre-Alarm settings should be set for at least 7 seconds.
SureView video will begin 7 seconds prior to the triggering event, so you will want to set the number of seconds of pre- alarm recording to 7 seconds.
Pre-Alarm settings should be set for at least 7 seconds. SureView video will begin 7 seconds prior to the triggering event, so you will want to set the number of seconds of pre-alarm recording to 7 seconds.

26. Set Record Mode for Sureview Compatibility
For SureView compatibility, you need to configure Continuous + Motion recording in Apex
Configure camera for Continuous + Motion
For SureView compatibility, you need to configure Continuous + Motion recording in Apex

27. Set Record Mode for Sureview Compatibility
In Apex, access the Setup menu and select Cameras, then select the camera being used for SureView events.
In Apex, access the Setup menu and select Cameras, then select the camera being used for SureView events.

28. Set Record Mode for Sureview Compatibility
Select the Live / Recording tab and then select the radio button for Continuous + Motion.
Select Live / Recording, then select the radio button for Continuous + Motion