1. By Dr. Nahed Nasser

2. CONTENTS >> Hydrocarbons >>Structure of alkanes >> Representation of M F >> Classes of carbon and hydrogen atoms >> Hybridisation of orbitals >> Structural isomerism in alkanes >>Alkyl Groups and Structural isomerism >> IUPAC nomenclature of alkanes >> Physical properties of alkanes >> Preparation of alkanes >> Reactions of alkanes >> Pollution >>Cycloalkanes, nomeclature, cis / trans isomerism and reactions THE CHEMISTRY OF ALKANES

3. Alkanes : C n H 2n+2 Molecular FormulaName CH 4 Methane C2H6C2H6 Ethane C3H8C3H8 Propane C 4 H 10 Butane C 5 H 12 Pentane C 6 H 14 Hexane C 7 H 16 Heptane C 8 H 18 Octane C 9 H 20 Nonane C 10 H 22 Decane 3

4. REPRESENTATION OF MOLECULAR FORMULAS 4

5. 5

6. Drawing alkanes n-Pentane 6

7. Classes of carbon and Hydrogen Primary carbon : CH 3 -CH 2 -CH 3 Secondary carbon : CH 3 -CH 2 -CH 3 Tertiary carbon : (CH 3 ) 2 -CH-CH 3 Hydrogens are also referred to as 1º, 2º or 3º according to the type of carbon they are bonded to. 7

8. Sp 3 HYBRIDISATION OF ORBITALS The electronic configuration of a carbon atom is 1s 2 2s 2 2p 2 1 1s 2 2s 2p If you provide a bit of energy you can promote (lift) one of the s electrons into a p orbital. The configuration is now 1s 2 2s 1 2p 3 1 1s 2 2s 2p The process is favourable because the arrangement of electrons; four unpaired and with less repulsion is more stable 8

9. The four orbitals (an s and three p’s) combine or HYBRIDISE to give four new orbitals. Because one s and three p orbitals are used, it is called sp 3 hybridisation All four orbitals are equivalent in energy, each with 25 % S character and 75 % P character. 2s 2 2p 2 2s 1 2p 3 4 x sp 3 9

10. In ALKANES, the four sp 3 orbitals of carbon repel each other into a TETRAHEDRAL arrangement with bond angles of 109.5º. Each sp 3 orbital in carbon overlaps with the 1s orbital of a hydrogen atom to form a C-H bond. THE STRUCTURE OF ALKANES 109.5º 10

11. The length of the bond: 1.54 A Angle: 109.5 11

12. Structural Isomerism in alkanes Different compounds with identical molecular formulas are called ISOMERS and the phenomenon is called ISOMERISM Butane Isobutane Boiling point 0 -121 Melting point -138 -145 12

13. Pentane, C 5 H 12 has three chain isomers Exercise : Draw all possible structural isomers for the M.F. C 6 H 14. And name them Or How many isomeric structures can be exhibited by the M.F. C 6 H 14 ? 13

14. Alkyl groups Alkyl groups are formed by loss of a hydrogen atom from the corresponding alkane ( e.g. CH 4 Methane – 1 H = CH 3 Methyl group ) Alkyl groups are named by dropping the -ane suffix of the alkanes and adding the suffix -yl. Methane becomes a methyl group, ethane an ethyl group, etc. 14

15. Structural isomerism in alkyl groups Propyl group C 3 H 7 (can give two isomeric alky groups) OR 15

16. Butyl group C 4 H 9 It can exist in three isomeric forms 16

17. IUPAC NOMENCLATURE OF BRANCHED- CHAIN ALKANES 1- Locate the longest continuous chain of carbon atoms; this chain determines the parent name for the alkane. Sometimes, you may need to go around corners and zigzag to find the longest (parent) chain. (the parent chain is in blue): If the parent chain for example has 6 carbon atoms, therefore, it is a derivative of hexane and if it has 4 carbon atoms it is derivative of butane and so on. 17

18. 2- Number the longest chain beginning with the end of the chain nearer to the substituent. 18

19. 3- Use the numbers obtained by application of rule 2 to designate the location of the substituent group. The parent name is placed last; the substituent group, preceded by the number indicating its location on the chain, is placed first. 19

20. 4. When two or more substituents are present, give each substituent a number corresponding to its location on the longest chain. The substituent groups are listed alphabetically regardless of their order of occurrence in the molecule. Cl is called chloro, Br called bromo, I called iodo, NO 2 called nitro, CN called cyano 20

21. 5) When two or more substituents are identical, indicate this by the use of the prefixes di-, tri-, tetra-, and so on. In case of deciding alphabetical order of many substituent disregard multiplying prefixes such as “di”and “tri”, “tetra”, “penta”, …. 21

22. 6) When two substituents are present on the same carbon, use the number twice. 22

23. 7. When two chains of equal length compete for selection as the parent chain, choose the chain with the greater number of substituents. 23

24. 8. When branching occurs at an equal distance from both ends of the longest chain, choose the name that gives the lower number at the first point of difference. 24

25. Summary of IUPAC system of nomenclature 1.Find and name the longest continuous carbon chain. 2.Identify and name groups attached to this chain. 3.Number the chain consecutively, starting at the end nearest a substituent group. 4.Designate the location of each substituent group by an appropriate number and name. 5.Assemble the name, listing groups in alphabetical order. 6.The prefixes di, tri, tetra etc., used to designate several groups of the same kind, are not considered when alphabetizing. 7.Halogen substituents are easily accomodated, using the names: fluoro (F-), chloro (Cl-), bromo (Br-) and iodo (I-). 25

26. Examples of the IUPAC Rules in Practice By inspection, the longest chain is seen to consist of six carbons, so the root name of this compound will be hexane. A single methyl substituent (colored red) is present, so this compound is a methylhexane. The location of the methyl group must be specified, since there are two possible isomers of this kind. The IUPAC name is thus 3-methylhexane. 26

27. Thus the parent chain will be the one with 4 substituents and the correct IUPAc name of this compound is :3-Ethyl-2,2,5-trimethylhexane 27

28. Important notes The common names isopropyl, isobutyl, sec-butyl, tert-butyl are approved by the IUPAC for the substituted groups. di, tri, tetra, and (tert are ignoredSubstituent groups are cited in the name in alphabetical order, regardless of their order of occurrence in the molecule. Prefixes di, tri, tetra, and (tert written in italics and separated from the name by a hyphen) are ignored, but prefixes iso, neo, and cyclo are not! Thus “tert-butyl” precedes “ethyl”, but ethyl preceeds “isopropyl” 3-ethyl comes before 2,2-dimethyl 4-hexyl comes before 2,3-diisopropyl 3-Tert-butyl comes before 3-isopropyl 28

29. Physical Properties Methane, ethane, propane, and butane are gases; pentane through hexadecane are liquids; the homologues larger than hexadecane are solids. The boiling points and melting points of alkanes increase with molecular weight. Branching reduces the boiling point, the more branching the lower the boiling point. Alkanes are non- polar so are immiscible with water, they are soluble in most organic solvents. 29

30. Preparation of alkanes 1- Hydrogenation of unsaturated hydrocarbon: 2- Hydrolysis of Grignard reagent 30

31. 3- Reduction of alkyl halides a) by metal and acid or by metal hydrides b) By sodium metal (Coupling reaction) c) By lithium dialkyl cuprate 31

32. Reactions of alkanes Chemically alkanes are very unreactive and stable at room temperature towards acids, bases and most reactive metals. Despite their relative inertness ( thus they known as paraffines i.e lacking affinity), alkanes undergo several important reactions that are discussed in the following section. 32

33. 1- Halogenation1- Halogenation Halogenation is the replacement of one or more hydrogen atoms in an organic compound by a halogen (fluorine, chlorine, bromine or iodine). The halogenation of an alkane appears to be a simple substitution reaction in which a C-H bond is broken and a new C-X bond is formed; the reaction takes place in presence of heat or UV light ( no reaction in the dark) If there is one type of the carbon atoms in the molecule (e.g. methane and ethane) If there are different types of carbon atoms in the molecule (Selectivity issue) When alkanes larger than ethane are halogenated, isomeric products are formed. Thus chlorination of propane gives both 1-chloropropane and 2- chloropropane as mono-chlorinated products. 33

34. 2- combustion of alkanes 2- combustion of alkanes (burning them- destroying the whole molecule ) 160 kcal\mol for each methylene group (CH 2 ) 34

35. Processes involving combustion give rise to a variety of pollutants... power stationsSO 2 emissions produce acid rain internal combustion enginesCO, NOx and unburnt hydrocarbons Removal SO 2 react emitted gases with a suitable compound (e.g. CaO) CO and NOxpass exhaust gases through a catalytic converter Catalytic converters In the catalytic converter...CO is converted to CO 2 NOx are converted to N 2 Unburned hydrocarbons are converted to CO 2 and H 2 O e.g. 2NO + 2CO ———> N 2 + 2CO 2 Catalysts are made of finely divided rare metals Rh, Pd, Pt Leaded petrol must not pass through the catalyst as the lead deposits on the catalyst’s surface and “poisons” it, thus blocking sites for reactions to take place. POLLUTION 35

36. Cycloalkanes Cycloalkanes Cycloalkanes are alkanes that have carbon atoms forming rings (called alicyclic compounds) Simple cycloalkanes have the formula (CH2)n, or CnH2n Nomenclature of Unsubstituetd Cycloalkanes COMPOUNDS 1. Cycloalkanes with only one ring: 36

37. 37 Naming Substituted Cycloalkanes Count the number of carbon atoms in the ring and the number in the largest substituent chain. If the number of carbon atoms in the ring is equal to or greater than the number in the substituent, the compound is named as an alkyl-substituted cycloalkane. For an alkyl- or halo-substituted cycloalkane, start at a point of attachment as C1 and number the substituents on the ring so that the second substituent has as low a number as possible. Number the substituents and write the name with the substituents in alphabetical order 37

38. 38

39. 39

40. However if the alkyl sustituent is large and/or complex, the ring may be named as a substituent group on an alkane. 40

41. 41 Cis-Trans Isomerism in Cycloalkanes Rotation about C-C bonds in cycloalkanes is limited by the ring structure There are two different 1,2-dimethylcyclopropane isomers, one with the two methyls on the same side (cis) of the ring and one with the methyls on opposite sides (trans) 41

42. Reactions of cycloalkanes Less stable rings More stable 5 and 6 rings 42