Presentation is loading. Please wait.

Presentation is loading. Please wait.

K. Vakhrusheva A. Maksyakova A. Adykaeva O. Karabeleyeva

Similar presentations


Presentation on theme: "K. Vakhrusheva A. Maksyakova A. Adykaeva O. Karabeleyeva"— Presentation transcript:

1 K. Vakhrusheva A. Maksyakova A. Adykaeva O. Karabeleyeva
Extruding K. Vakhrusheva A. Maksyakova A. Adykaeva O. Karabeleyeva

2 plan Definition of extrusion Types of extrusion
The product to be extruded Extrusion’s equipment Main problems Solution of problems Conclusion

3 Definition of extrusion
Extrusion is a process used to create objects of a fixed cross-sectional profile

4 Types of extrusion

5 Classification by the product to be extruded

6 Extrusion’s equipment

7 The main problems of extrusion
modification to the rheological properties of the mass; any change to the profiles; modification to the screw or cylinder surfaces which courses the increased proportion in the flow-back; increase in the flow rate combined with increased strand velocity; vacuum errors through leakage.

8 Rheological properties
Advantages are: Very complicated cross-sections are possible, Relatively small amounts of liquid are added to the solid, Binders and rheology modifiers can positively affect product properties, The technology is capable of shaping very hard and abrasive powders, A uniform density of distribution is achieved, The capital costs are low, The running costs are low

9 Modification to the Nozzle

10 Modification to the screw or cylinder surfaces

11 Modification to Flow Rate
Extend the cylinder and screw Reduce the flow resistance of the nozzle or the nozzle consumer Increase the pressure-forming capacity of the screw Modification to the pressure increase angle through modification to the mass

12 Solutions of vacuum problem

13 Conclusion economically environmen-tal diversified

14


Download ppt "K. Vakhrusheva A. Maksyakova A. Adykaeva O. Karabeleyeva"

Similar presentations


Ads by Google