2. Is a white cement based – texture finish material for plastered surfaces. Is in dry powdered form, and only water is mixed with it before use. Is available for three kind of finishes, namely, Trowel Finish (TF), Roller/Spray Finish (RF). Is available in 25 Kg. PP laminated bags.

3. WHY TEXTURA? Decorates & protects both interiors & exteriors Available in wide range of colors, textures & designs Can be applied on damp walls Extra adhesive strength unlike other acrylic finishes Needs no curing

4. Birla White Cement Quartz Sand. Inert Mineral Fillers. Chemical Additive.

5. Being white cement based, it offers a range of benefits, such as Durable/ permanent finish. Better adhesiveness, once applied on mortar/ plastered surface it becomes a part of the surface. Covers the fine cracks and other minor defects of the plastered surface. Has sufficient breath-ability, to breathe out the entrapped moisture. SALIENT FEATURES OF TEXTURA

6. Ideal for decoration and protection of Exterior and Interior Walls. Relatively economical than acrylic based material. Can be applied on moist and damp walls. Each finish (Trowel/ Roller/ Spray) offers a variety of textures and designs. The inert mineral filler, white cement and chemical additives make it water resistant.

7. SALIENT FEATURES OF TEXTURA The eco-friendly materials/ chemicals used in Textura makes it suitable for all weather conditions. Textura is designed to make the finish resistant to microbial growth. There is no health hazard or environmental impact during its application, therefore, Textura is safe to use.

8. Roller / Spray Finish

10. 1.Physical stateReady to use Powder Form 2Pot life2 hours (approx.) 3Surface hardness3 to 4 N 4Max. thickness2.5 mm 5Coverage6-8 sq. ft. per Kg.-Roller finish 8-10 sq. ft. per kg. -Spray finish (Depends on Surface) 6Drying time2-3 hours, may vary due to change in temperature and humidity

11. Trowel Finish

13. 1.Physical stateReady to use dry powder form. 2Pot life2 hours (approx.) 3Surface hardness3 to 3.5 N 4Max. thickness3 mm 5Coverage4 to 5 sq. ft. per Kg. (Depends on surface) 6Drying time2-3 hours, may vary due to change in temperature and humidity

15. TEXTURA ACRYLIC TEXTURES Water Resistant.Not Water Resistant. Cement Based – more adhesive strength. Less Adhesive strength. Can be applied on moist and damp surfaces. Only on dry surfaces. Economical.Relatively Costly.

16. The surface (wall) should be in line & level. Use the material within two hours of adding water. The roller/spray-gun/ trowel should be cleaned properly after use. Keep the dry mix material in dry place and out of reach of children. To get water repellant and non-sticky surface, apply a good quality water-soluble silicone, on the dry textured surface.