1. Starter
For each of these angles labelled x, name the type of angle, estimate its size and give a definition of that type of angle. 1) 2) 3) 4)

3. 3 rules of bearings... They must start from NORTH
They must be measured CLOCKWISE
They must have THREE DIGITS

4. Matching compass points...

5. Measuring bearings 075° Find the bearing of A from B.
Mark the North line on at B (if there isn’t a North line draw one in) N A
75°
Measure the angle clockwise from the North line to A B
Give the answer as a three-figure bearing
075°

6. Measuring bearings 294° Find the bearing of A from B.
Mark the North line on at B (if there isn’t a North line draw one in) A N
Measure the angle clockwise from the North line to A B
294°
Give the answer as a three-figure bearing
294°

7. Answers
040° 056° 114°
159° 221° 250°
270° 302° 340°
Plane A = 139° Plane B = 106°
Plane C = 071° Plane D = 024°
Plane E = 327° Plane F = 242°
Plane G = 215°

8. Drawing bearings A is 4cm from B on a bearing of 082°.
Mark the North line on at B (if there isn’t a North line draw one in). N A
Measure the angle clockwise from the North line and mark a point.
082°
4cm B
Measure a line the right length going through the point you have just marked.

9. Drawing bearings A is 3cm from B on a bearing of 226°.
Mark the North line on at B (if there isn’t a North line draw one in).
Measure the angle clockwise from the North line and mark a point. B
3cm
226°
Measure a line the right length going through the point you have just marked. A

10. Answers