Download presentation
Presentation is loading. Please wait.
Published byEmmanuel Elton Modified over 10 years ago
5
SpeciesBlack Oak, Oak Roast, Oak Distressed, Toscana, Aosta, Artic Natural GrainNatural Moisture6 – 10% Dimensional Stability 0.80% change in width 0.67% change in thickness at 50% relative humidity change over a period of 48 hrs. CoatingAluminum Oxide for High Scratch Resistance FinishingAntiq Finish JoineryPatented Click / T & G Size1830 X 189 X 15 mm Core BoardOak Wood / Poplar Wood Top Layer Thickness4 mm
8
SpeciesOlive Oak, Smoked Oak, Golden Oak GrainNatural Moisture6 – 10% Dimensional Stability0.80% change in width 0.67% change in thickness at 50% relative humidity change over a period of 48 hrs. CoatingAluminum Oxide for High Scratch Resistance FinishingAntiq Finish JoineryPatented Click / T & G Size1830 X 148 X 15 mm Core BoardOak Wood / Poplar Wood Top Layer Thickness4 mm
12
SpeciesNatural Oak, White Oak, Walnut, Teak, Merbau GrainNatural Dimension2200 x 202 x 14.5 mm Dimensional Stability0.80% change in width 0.67% change in thickness at 50% relative humidity change over a period of 48 hrs. CoatingAluminum Oxide for High Scratch Resistance FinishingSilk matt JoineryPatented Click / T & G Moisture6-10% Steel Wool astm / En 438 S33 Sandpaper 1000 gm Average Cycles 2375 Resistance To Glowing Cigarette 6 C
13
Steel wool anti scratch resistance DIN 68 861 part 6 4A (will not scratch) Inflammability DIN 4102 B1 Impact Test 1 kg. 30 cm height Good Ring Pressure Excellent Heat Test 1 kg. 30 cm height 120 Degree Celsius Chemical Resistance Din 68 861 Part 1 1 B
14
On the Taber (hardness) test, this UV cured finish withstands a 1000 gram weight at 1000 cycles. Our product lost only 63.5 milligrams of finish per 1000 cycles, and only 21-25 milligrams per mil of thickness. Our product carries a limited warranty of ten years in Domestic usage. (No warranty for heavy commercial use.)
16
WOOD IS A NATURAL PRODUCT AND SO THERE ARE DIFFERENT COLORS AND FIBRES WHICH MAKE THEM DIFFERENT FROM EACH OTHER. WOOD GETS LITTLE DARKER AND UNIFORM, ONCE IT IS EXPOSED TO LIGHT.
17
SPECIAL TREATMENT REMOVES ALL SOFTER PARTS OF THE WOOD FROM THE SURFACE ENHANCING THE VEINS IN THE HARD WOOD. IN CASE OF OILING AND SPECIAL TREATMENT, WOOD ABSORBS OIL SHOWING UP ITS NATURAL BEAUTY.
18
Steel Wool ASTM / EN 438 S33 Sandpaper 1000 gm. Average Cycles 2375 Resistance to Glowing Cigarette6c Steel wool anti scratch resistance DIN 68 861 part 64A (will not scratch) Inflammability DIN 4102B1 Impact Test 1 kg. 30 cm heightGood Ring PressureExcellent Heat Test 1 kg. 30 cm height120 Degree Celsius Chemical Resistance Din 68 861 Part 11 B
19
3-LAYER WOOD FLOORS ARE BUILT HAVING MULTIPLE THIN PLY LAYERS THAT ARE GLUED TOGETHER. THE INNER CORES ARE GENERALLY EITHER A HARDWOOD AND/OR SOFT PLYWOOD TYPE MATERIAL, WHICH INCORPORATES THE TONGUE AND GROOVE SYSTEM. THE TOP THICKER HARDWOOD VENEER WEAR LAYER IS GLUED ON TOP SURFACE OF THE CORE AND IS AVAILABLE IN ALMAST ANY HARDWOOD SPECIES.
20
ANTIQUE FLOORS HAVE A LIFESPAN ANYWHERE FROM 10-25 YEARS. USING AN ANTIQUE WOOD FLOOR ALLOWS YOU TO HAVE A WOOD FLOOR ON ANY GRADE LEVEL. IT CAN BE USED ON WOOD SUB FLOORS OR DRY CONCRETE SLABS. BETTER SUITED FOR HUMID AREAS OF THE COUNTRY. ANTIQ FLOORS ARE VERY EASY AND FAST TO INSTALL. ANTIQU FLOORS ARE MORE DIMENSIONALLY STABLE THAN SOLID WOOD FLOORS. ANTIQ FLOORS ARE AVAILABLE IN MANY DIFFERENT SIZES, COLORS AND STYLES. SOME ANTIQ FLOORS CAN BE SANDED AND REFINISHED NEW AGAIN IF NEEDED. ANTIQ FLOOR COVERING INCREASES THE VALUE OF YOUR HOME. ANTIQU FLOOR DOES NOT CAUSE ALLERGIES, RECOMMENDED TO USE BY ALLERGISTS.
21
BEST SURFACE CONDITIONS WITH HIGHEST ABRASION RESISTANCE. NO SANDING WAXING AND LAQUERING. RESISTANT TO CIGARETTE BURNS. SHOCK PROOF AND WEAR RESISTANT. SIMPLE AND EFFICENT INSTALLATION. FIRM AND STABLE FOR UNDER FLOOR HEATING AS IT ADJUSTS TO SEASONAL CHANGES IN TEMPERATIURE AND HUMIDITY. PATENTED CLICK SYSTEM. ZERO MAINTENANCE. ADDITIONAL COATING OF ALLUMINIUM OXIDE FOR SCRATCH RESISTANCE AND DURABILITY. SUITABLE FOR FLOOR HEATING PLANTS
22
The finish is a blend of urethane, aluminum oxide, and silica for a very durable and long lasting finish. The flooring is coated 4 (2.5 mil) times on our natural finish and 5 (3.0 mil) times on our stained finishes. This makes our finish one of the thickest available, on top of an already impressive 4mm solid wood floor.
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.