Presentation is loading. Please wait.

Presentation is loading. Please wait.

Focus on the base of water drops placed on hot repellent substrates

Published byAnatol Urbaniak Modified over 5 years ago

Similar presentations

Presentation on theme: "Focus on the base of water drops placed on hot repellent substrates"— Presentation transcript:

1 Fig. 4 Focus on the base of water drops placed on hot repellent substrates.
Focus on the base of water drops placed on hot repellent substrates. (A) Setup: A drop is deposited on a Glaco-treated sapphire brought to a temperature T. The contact zone is observed from below with an inverted microscope. (B) Visualization of the contact area whose radius r is 0.4 mm for a drop with radius R = 1.0 mm at T = 51°C (left), T = 75°C (center), and T = 150°C (right). Vapor patches appear around 70°C, and we highlight their contour in red. (C) Close-up on the fringes seen in the central region of the vapor patches seen in (B) at T = 75°C. (D) Fraction ϕv occupied by the vapor patches as a function of temperature T and measured 0 to 10 s after drop deposition. Each data point is an average over at least three drops, and error bars represent standard deviations. The bars are large in the critical regime of vapor formation and get smaller at larger T where they even become negligible when reaching the vapor patch stationary state at large time t. Philippe Bourrianne et al. Sci Adv 2019;5:eaaw0304 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Focus on the base of water drops placed on hot repellent substrates"

Similar presentations

Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 4 INS spectra of different human bones from the Roman period [humerus, ulna, femur, and fibula from the same skeleton, Guidonia-Montecelio, Italy.

Fig. 4 INS spectra of different human bones from the Roman period [humerus, ulna, femur, and fibula from the same skeleton, Guidonia-Montecelio, Italy.
Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.

Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.
Fig. 2 Adhesion of water on hot repellent materials.

Fig. 2 Adhesion of water on hot repellent materials.
Fig. 1 Water drops on hot hydrophilic and superhydrophobic materials.

Fig. 1 Water drops on hot hydrophilic and superhydrophobic materials.
Fig. 3 Vibrational spectra of human bones from the Copper Age (Scoglietto cave, Italy). Vibrational spectra of human bones from the Copper Age (Scoglietto.

Fig. 3 Vibrational spectra of human bones from the Copper Age (Scoglietto cave, Italy). Vibrational spectra of human bones from the Copper Age (Scoglietto.
Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)

Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)
Fig. 3 Oil, gas, and FP water variations with time.

Fig. 3 Oil, gas, and FP water variations with time.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 1 Wireless, battery-free neural cuff for programmable pharmacology and optogenetics. Wireless, battery-free neural cuff for programmable pharmacology.

Fig. 1 Wireless, battery-free neural cuff for programmable pharmacology and optogenetics. Wireless, battery-free neural cuff for programmable pharmacology.
Fig. 3 Electron PSD in various regions.

Fig. 3 Electron PSD in various regions.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture.

Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture.
HT synthesis of boronic acids using the building block approach

HT synthesis of boronic acids using the building block approach
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.

Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.

Similar presentations

Ads by Google