1. How to Install LG Ericsson PABX System www.pabxinstallationdubai.ae

2.  A third party TAPI (telephony programming application interface) license on PABX  Firmware requirement iPECS – E.0dy or later  Firewall requirement iPECS – UDP: 5588  Minimum version requirement of Go Connect Server 2.4.0  Require the IP address of the PABX system  The PABX system should be connected to the same subnet as the Go Connect Server and to the same switch if possible.PABX system Requirements to connect LG Ericsson PABX System

3. How to connect LG Ericsson iPECS PABX System to the network architecture The iPECS system can be connected to the LAN via a network socket on the main unit by setting the IP address and other net work settings through programming on the HTML interface.

4. Steps to install LG Ericsson iPECS PABX System The Go Connect Server essentially is a p owerful integrated software suite that inte grates a lot of supported phone systems 1.The first step is to add the IP address of the Go Connect Server on the PABX Syst em including the System data, System Att ributes (160, 161), and the IP address in CTI IP (52). 2.No error message is thrown even if the above step does not help in connecting to the LG Ericsson PABX system.

5. Continue.. 3. You will have to manually check the IP address of the PABX s ystem and Tapi license and retry. To validate the existence of TA PI license on PABX, press Trans/PGM and then enter 78 or 7* o n iPECS. The appearance of the digit 2 on the second line of the display confirms the existence of TAPI license. Visit: https://bit.ly/2HLlzTmhttps://bit.ly/2HLlzTm

6. Contact Us Techno Edge Systems LLC P.O.BOX-116216, Talib, Moosa, MAHD & Khalid Building, 312/32 Street DM.18 SHOP 9, Bur Dubai,Dubai, U.A.E. Call us : +971508740112/04-2513636 support@technoedge.ae www. pabxinstallationdubai.ae