1. All Call Multiple 5100’s (From Single PBX page 1 of 2)
1 tw/pr to each 5100 (Audio)
V1101A
1 tw/pr to each 5100 (24 VDC, OVDC.)
24 VDC
VP1124
Note: 1 Pair of wires to deliver the audio to remote 5100’s and into the mic input and one pair to deliver 24 vdc to activate remote relay which connects across monitor point programmed to activate mic input.
1 Pair of wires to deliver the audio to remote V1094A and into the mic input and one pair to deliver 24 vdc to activate remote relay which go’s across monitor point programmed to activate mic input.
Loop Start Trunk Port

2. All Call Multiple 5100’s (From Single PBX page 2 of 2) At each remote 5100
Mic
Audio
TX-LM2
From PBX
MR Relay
Mon
input
24 VDC

3. All Call Multiple 5100’s (From 5100 page 1 of 1)
Main5100
Slave5100
Mic
V-LPT
TX-LM2
Classroom Output
Mon
input
Note: Main systems All Call command will now activate both systems. To all call main system only a page group needs to be made that includes all points except the point driving the V-LPT shown. Multiple slave 5100’s may be driven.