1. KPL CHINA SOURCING CO., LTD. Mail: info@kplchinasourcing.cominfo@kplchinasourcing.com Website: www.kplchinasourcing.comwww.kplchinasourcing.com FURNITURE 32MM SYSTEM A BRIEF INTRODUCTION

2. Furniture 32mm System Introduction 32mm System is an industrial standard which has been agreed by furniture and furniture fittings manufacturers worldwide. It originates from the center to center spacing of the drill pattern. 1.System hole diameter: Ø5mm 2.Hole spacing: 32mm 3. Distance between center of hole line and front edge of side panel: 37mm 4.Distance between rear hole center line and rear edge of side panel: 37mm 5.The first and last hole in a hole line should be the same distance from the top and bottom edges of side panel Basic Rules

3. Furniture 32mm System Introduction 32mm System Advantages 1.Suitable for mass production, improve production effectiveness, reduce cost 2.Reduce new product design and development cycle time by using standardized furniture fittings 3.Improve hole position accuracy, improve furniture quality 4.Furniture fittings interchangeable from different manufacturers 5.Make KD(knock-down) furniture and DIY easier 1. Metal shelf support Shelf support diameter is designed equal to side panel drilling hole diameter: Ø5mm Furniture fittings designed to 32mm system

4. 2. Concealed hinge 1.Mounting plate 2 fixing holes center distance: 32mm 2.Hole center line to the front edge of side panel distance: 37mm 3. Side panel drilling hole: Ø5mm Furniture 32mm System Introduction

5. 3. Drawer runner 1. Fixing hole center to the front edge of side panel distance: 37mm 2. Fixing hole spacing patten is: 32mm system 3. Side panel drilling hole: Ø5mm Furniture 32mm System Introduction

6. The End The End !