1. Välkommen/Welcome – who ever concerned…
High quality press brakes, guillotine shears and special hydraulic presses! 1

2. Group structure effective per 31 December 2013
Sentica
Growth
Fund II
Finnish Industry Investment
Etera
Management
53%
25%
13% 9%
Ursviken Group Oy
100%
100%
100%
Ursviken Management AB
Ursviken Holding AB
Growth Fund Oy
100%
100%
Kantpressen 1 AB
Pivatic Oy
Ursviken Technology AB
Pivatic Varikko Oy
100%
Ursviken Inc.
Illinois, USA
Strictly private and confidential

3. Press Brakes – OptiFlex
100 ton 2,1 meter – 320 ton 6,1 meter

4. Press Brakes – OptiFlex, robot assisted
Robot assisted press brake
Press power 200 ton
Bending length 5.1m
Bending panels and lists. Short side in wing bender in robot
Specially equipped with tool changer, including both upper and lower tool
Built for very thin material, e g 0,8 mm aluminum
Tool system
Tool systems 4

5. Press Brakes – Tandem Optima
Press power 1,250 tons per machine, 2,500 tons in total
Bending length 2 x 8.4m, 16.8m in total
In-feed equipment from front of the machine
Out feeder mounted in die tool (goes to the left)
Front and back gauges
Chinese customer
Machine is used for manufacturing of poles, both mutli-sided and round poles 5

6. Press Brakes – Optima OPTIMA Optima 2,000 tons 12.2 metres and
Both machines with VDT
9 axis back gauges
Flexicrown
Manual supports on front side
Customer – job shop with various production

7. Press Brakes – Optima, during design phase…7

8. … and during assembly Optima Press power of 3,000 tons
Bending length 18.4m
VDT
Flexicrown
7 heavy duty lift-and swings
Front gauges with straightening function
Back gauges 9 axis
In total 24 CNC axis
Delivered in 2004
Machine value at delivery approx. EUR 3m 8

9. Press Brake Tandem Optima Press power of 2*2.200 ton
Bending length 18,4 meters
Extractor to push 10 ton 9

10. Press Brakes – in design phase10

11. Press Brakes – ready for delivery
Optima
Press power: 4000 tons
Bending length: 14.5m
Stroke in ram: 1,500mm
Daylight: 4,000mm
Gap in frames: 1,600mm
Total height above floor: 9m
Height of frames: 14.5m
VDT: mm
Front and back gauges
Tool rack, CNC controlled
Max upper tool radius ordered: 250mm
Worlds biggest…? 11

12. Press Brakes – in design phase
Optima – Tandem 2 x 5,000 tons, 2 x 6.5m

13. Press Brakes – in installation phase
OPTIMA
Tandem 2 x 5,000 tons
Bending length 2 x 6.5m

14. Optional equipment – control system
Cybelec control
B&R control for Flexicrown
Cyblec control system for tandem
B&R for control of automated positioning of plates 14

15. Optional equipment – tool clamping
Ursviken std,
13 mm or 1/2 inch
With lifting device and rollers for
heavy tool holder or tools.
175 mm width inside
Ursviken 28 mm with rollers
A “real heavy clamp”
material weight 1 ton each 15

16. Optional equipment – Variable die tool
Variable CNC die tool
Die opening mm 16

17. Optional equipment – Variable die tool
Variable CNC die tool
Die opening mm 17

18. Optional equipment – Lift and swing
CNC controlled lift and swing, size II 18

19. Optional equipment – 6 axis back gauges
Size I: Optiflex
Size II: Rec to tons
Size III: Rec to tons
Size IV: Rec to ton 19

20. Optional equipment – Back gauges
Stroke 2500 mm
Straightening function
Stroke up to 5 meters delivered, now designing 11 meters!
Different solutions of the “head” and fingers 20

21. Ship building, SBRP 400 ton

22. Winding press Presses transformer Windings (presses the windings
together to make them tight)
Made for 250 and 400
tons power
Diameter up to 4 meters 22

23. Pipe calibration press – Installed
Press power of 12,000 tons

24. Customer products – Poles & Pipes
Light pole and power transportation produced in a tandem press brake
2 x 1,250 tons
2 x 8.4m
Machine both for round poles and for multi-sided poles
36 meter high pole with a diameter of 1.5m
Pipes for oil and gas industry; material 70 mm and length 12 m

25. Customer products – mobile cranes
Arms are made in press brakes
Customer in China
Leading Chinese crane manufacturer – makes cranes up to 500 tons, all arms are made in Ursviken machines
Volume of 1,500 vehicles a month

26. Customer products – Selected end-products

27. Ursviken customer range
From small companies, like Ume-Trailer in north of Sweden…
...to big ones, like Hyundai Heavy Industries of Korea

28. Ursviken customer range