1. DCN Remote control facilities
LBB3500/05
Stand Alone:
no remote
control facility
available
LBB3500/15
Stand Alone:
with remote control facility
LBB3500/15 /35
with PC Control & remote control facility
DCN Remote Control Panels

2. CCU’s comport for Open Interface connection
System Installation
Microphone management
Voting
Attendance Registration
Intercom
Message Distribution
LBB 3587 for opening Open Interface
RS 232
DCN Remote Control Panels

3. Control panel and standard hardware
Touch panel and interface box + custom made software
For the Chairman
and Operators
DCN Remote Control Panels

4. Custom made SW for controlling DCN
Assigning applications
Microphone control and mode
selection
Voting control and showing results
Activating Attendance Registration
DCN Remote Control Panels

5. Page for selecting DCN voting modes
DCN Remote Control Panels

6. Control equipment from AMX & Crestron
DCN Remote Control Panels

7. How to handle
Bosch Security Systems BV is not supplying touch screen equipment.
Contact AMX or Crestron dealer locally.
React proactive. Select the dealer which has experience and is dealer for Bosch and AMX or Crestron.
DCN Remote Control Panels

8. JACOMIC 200 Remote control system for DCN microphones
DCN Remote Control Panels

9. JACOMIC 200 Remote control system for DCN microphones
DCN Remote Control Panels

10. JACOMIC 200 Remote control system for DCN microphones
System description:
Remote control for a maximum of 192 DCN microphones.
The available control modes are:
Request list, technician only
Request list, technician and delegates
First in first out, technician only
First in first out, technician and delegates
Open, technician and delegates
Voice operated
Maximal number of activated microphones is 1, 2 or 4.
Microphone control with an individual switch for each microphone
Microphone status presented by two individual LEDS for each microphone
Next microphone switch for use with the request list and the first in first out modus
DCN Remote Control Panels

11. JACOMIC 200 Remote control system for DCN microphones
COMPONENTS JACOMIC 200
Microprocessor board JACOMIC 200 / controller
Switch and LED matrix for set up and control incl. flat cable JACOMIC 200 / Tsw4
Switch and LED matrix for control of 64 mic. incl. flat cable JACOMIC 200 / Msw
Interface for Switch and LED matrix incl. flat cable JACOMIC 200 / int64
Data cable with a DCN power interface, length 5 metre JACOMIC 200 / 232ps
Data extension cable 5 metre JACOMIC 200 / 232dext 5
Data extension cable 10 metre JACOMIC 200 / 232dext 10
Flush-Mounted panel for Tsw and 1* Msw64 JACOMIC 200 / fmp 64
Flush-Mounted panel for Tsw and 2* Msw64 JACOMIC 200 / fmp128
Flush-mounted panel for Tsw and 3* Msw64 JACOMIC 200 / fmp 92
Desktop console 64 microphones JACOMIC 200 / desk 64
Desktop console 128 microphones JACOMIC 200 / desk128
Desktop console 192 microphones JACOMIC 200 / desk192
Customer design control panel JACOMIC 200 / special**
Open Interface Software Philips LBB3587/** LBB3587/**
DCN Remote Control Panels

12. JACOMIC 200 Remote control system for DCN microphones
Basic system for 64 microphones JACOMIC 200 / basic 64
The basic 64 system consists of the assembled items:
1 Micro processor board JACOMIC 200 / controller
1 Switch and LED matrix for setup and control, incl. flat cable JACOMIC 200 / Tsw
1 Switch and LED matrix for control of 64 mic, incl. flat cable JACOMIC 200 / Msw64
2 Interface for Switch and LED matrix, incl. flat cable JACOMIC 200 / int64
1 Data cable with DCN power interface, length 5 metre JACOMIC 200 / 232ps
1 Flush-Mounted RVS panel for Tsw and one Msw64 JACOMIC 200 / fmp
1 Desktop console 64 microphones JACOMIC 200 / desk64
0 Open Interface Software Philips LBB3587/00 ver ** not included!
System requirements:
The DCN-CCU must be the LBB3500/10 /15 /30 /35
The DCN-CCU LBB3500/10, must be enabled by the Philips open interface software.
The software version of the LBB3587/00 ** must be compatible with the LBB3500/xx software version!
The maximal length between the JACOMIC 200 system and the LBB3500/10 is 25 metres.
The dimension of the cupboard for the 64 microphones is 300 by 200 mm.
DCN Remote Control Panels

13. Documents available
Doc’s about controllable applications and functions
(GD) General Remote Interface Description
(SCI) System Configuration & Installation
(MM) Microphone Management
(PV) Parliamentary Voting
(AT) Attendance Registration
(IC) Intercom
(MD) Message Distribution
DDTK toolkit
Application note
DCN Remote Control Panels

14. DCN Remote control facilities
End of section
 Robert Bosch GmbH
All rights are reserved. Reproduction or passing on to third parties in whole or in parts is prohibited without the written consent of the copyright owner.
DCN Remote Control Panels