Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of.

Published byMarcia Pierce Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of."— Presentation transcript:

1 Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). (A) Conductivity of the PEDOT films via spin coating followed by various STEC aqueous solution treatments. (B) XPS C60 ion gun sputtering depth profile of a stretchable PEDOT/STEC film. (C) Temperature dependence of the conductivity and (D) Arrhenius fitting for conventional PEDOT compared to those with STEC additives. (E) Sheet resistance of the PEDOT/STEC1 films in relation to their transparency. Transmittance values are extracted at 550 nm. (F) Patterned PEDOT/STEC film on SEBS (top) and the film being stretched (bottom). The line width is 1 mm. (G and H) Photograph (G) and optical microscope image (H) showing micrometer-scale patterns produced by inkjet-printing the PEDOT/STEC. (I) Illustration of the control of feature size, with a line width as small as 40 μm printed on a SEBS substrate. Yue Wang et al. Sci Adv 2017;3:e Copyright © 2017, The Authors

Download ppt "Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of."

Similar presentations

Wei-Ran Huang, Zhen He, Jin-Long Wang, Jian-Wei Liu, Shu-Hong Yu 

Wei-Ran Huang, Zhen He, Jin-Long Wang, Jian-Wei Liu, Shu-Hong Yu 
Fig. 4 3D reconfiguration of liquid metals for electronics.

Fig. 4 3D reconfiguration of liquid metals for electronics.
Fig. 2 Electronically conducting xylem wires.

Fig. 2 Electronically conducting xylem wires.
Fig. 2 Reconfiguration of liquid metals into 3D structures.

Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 1 High-resolution printing of liquid metals.

Fig. 1 High-resolution printing of liquid metals.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 3 Evolution of absorber with annealing.

Fig. 3 Evolution of absorber with annealing.
Fig. 2 In situ GIXD analysis tracing the thermal history of the 5CB-NOBOW 50:50 mixture in AAO upon cooling (dAAO = 60 nm). In situ GIXD analysis tracing.

Fig. 2 In situ GIXD analysis tracing the thermal history of the 5CB-NOBOW 50:50 mixture in AAO upon cooling (dAAO = 60 nm). In situ GIXD analysis tracing.
Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.

Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.
Fig. 5 High-speed printing and process performance metrics.

Fig. 5 High-speed printing and process performance metrics.
Fig. 3 Saturation velocity of BP FETs.

Fig. 3 Saturation velocity of BP FETs.
Fig. 4 Coatings on different substrates.

Fig. 4 Coatings on different substrates.
Fig. 2 CdS thin films with three different shapes.

Fig. 2 CdS thin films with three different shapes.
Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.

Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 1 TED design and fabrication process.

Fig. 1 TED design and fabrication process.
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.

Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.
Fig. 4 Transfer characteristics of the carristor.

Fig. 4 Transfer characteristics of the carristor.
Fig. 5 Pointwise-printed hierarchical materials with 3D microarchitectures having features that span over five orders of magnitudes in length scale. Pointwise-printed.

Fig. 5 Pointwise-printed hierarchical materials with 3D microarchitectures having features that span over five orders of magnitudes in length scale. Pointwise-printed.
Fig. 4 Electrical properties of GAP multilayer conductors and small-angle x-ray scattering analysis for the percolation network of Au NPs in a PU matrix.

Fig. 4 Electrical properties of GAP multilayer conductors and small-angle x-ray scattering analysis for the percolation network of Au NPs in a PU matrix.

Similar presentations

Ads by Google