1. Multi-View Drawings Thursday, November 4th 2004
Class 10.2: Multi-view Drawings

2. Learning Objectives
Be able to understand the three-view drawing layout to determine what lines are missing.
Be able to complete the orthographic views of each object shown to include visible, hidden and center lines.
Be able to complete the views using the alphabet of lines. 2

3. Completing the views
Rather than give a complete pictorial of an object, frequently you will see problems take the form of complete the missing lines.
All lines added to drawings must fall within the existing outlines of the views.
Try to minimize the number of lines added to the drawing.

4. Visualizing the process
To help you visualize this, start with a complete block the overall size of the object.
Slice pieces from the block until the final object is created.
The following slides demonstrate this concept.

5. Completing Orthographic Views

6. Add Notch in Side View

7. Complete other views

8. Add Sloped Features in Front

9. Complete Other Views

10. Add Notch in Top View

11. Complete other views

12. Finished object

13. Compare beginning to end

14. Pairs Exercise
Take 10 minutes to complete the views

15. Pairs Assignment Complete the following using AutoCAD 19 20
Due in 30 minutes with cover sheet and signatures.