1. Dose in 2 - 10l/h clean liquid
Slurry Design
Basic principle of handling solids :
pump and motor are separated
motor is filled with clean liquid
During operation clean liquid approx. 2-10l/h will be dosed in motor circulation => volume of dosed in clean liquid will flow from motor to pump => particles or liquid from pump cannot enter into motor
Heat exchanger
Dose in l/h clean liquid

2. Handling Solids with Slurry design
pump and motor are separated
motor is filled with clean liquid
During operation clean liquid approx. 4-6l/h will be dosed in motor circulation => volume of dosed in clean liquid will flow from motor to pump => particles or liquid from pump cannot enter into motor
Dosing pump, 4-6l/h

3. Slurry Design / CNK type with dosing pump for dose in clean liquid in motor end