Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 3 Performance of solar-vapor generation.

Published byNickolas Lee Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 3 Performance of solar-vapor generation."— Presentation transcript:

1 Fig. 3 Performance of solar-vapor generation.
Performance of solar-vapor generation. (A) Evaporation rates and energy conversion efficiencies of WHS for DI water, 10 wt % brine, and 30 wt % wastewater. (B) Ion concentrations before and after water purification. Seawater (collected from the Bohai Sea, China, with an average salinity of ∼1 wt %) and wasterwater (with heavy metal ions, Ni2+ and Cd2+) were used as water sources. The dashed blue lines and dashed violet lines show the WHO standard of ion concentrations for drinking water and standard for discharge, respectively. (C) Mass changes and evaporation rates of the WHS and a conventional solar absorber over 8 hours. Brine (10 wt %) was used as the water source. The evaporation rates out of pure water are also listed at 0 hours for comparison. (D) Photographs of the WHS and a conventional solar absorber over time when treating brine with 10 wt % salinity initially. (E) Outdoor solar evaporation performance of the WHS and a conventional solar absorber over 18 days when treating brine with 10 wt % salinity (photo credit: Ning Xu, Nanjing University). Ning Xu et al. Sci Adv 2019;5:eaaw7013 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 3 Performance of solar-vapor generation."

Similar presentations

Fig. 4 3D reconfiguration of liquid metals for electronics.

Fig. 4 3D reconfiguration of liquid metals for electronics.
Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 4 Ballistic simulation of BP FETs.

Fig. 4 Ballistic simulation of BP FETs.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 4 INS spectra of different human bones from the Roman period [humerus, ulna, femur, and fibula from the same skeleton, Guidonia-Montecelio, Italy.

Fig. 4 INS spectra of different human bones from the Roman period [humerus, ulna, femur, and fibula from the same skeleton, Guidonia-Montecelio, Italy.
Fig. 1 Schematic illustration of SVG based on the h-LAH.

Fig. 1 Schematic illustration of SVG based on the h-LAH.
Fig. 3 Vibrational spectra of human bones from the Copper Age (Scoglietto cave, Italy). Vibrational spectra of human bones from the Copper Age (Scoglietto.

Fig. 3 Vibrational spectra of human bones from the Copper Age (Scoglietto cave, Italy). Vibrational spectra of human bones from the Copper Age (Scoglietto.
Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)

Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Evolution of magnetic field lines around a foreshock bubble in the GSE-XY plane (z = 0): Results of a hybrid simulation. Evolution of magnetic field.

Fig. 1 Evolution of magnetic field lines around a foreshock bubble in the GSE-XY plane (z = 0): Results of a hybrid simulation. Evolution of magnetic field.
Fig. 6 Thermoelectric figure of merit of ZrCoBi-based half-Heuslers and measured heat-to-electricity conversion efficiency. Thermoelectric figure of merit.

Fig. 6 Thermoelectric figure of merit of ZrCoBi-based half-Heuslers and measured heat-to-electricity conversion efficiency. Thermoelectric figure of merit.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 3 Electron PSD in various regions.

Fig. 3 Electron PSD in various regions.
Fig. 4 Complete separation of water and solute after stable and efficient solar evaporation. Complete separation of water and solute after stable and efficient.

Fig. 4 Complete separation of water and solute after stable and efficient solar evaporation. Complete separation of water and solute after stable and efficient.
Design concept of the water lily–inspired hierarchical structure

Design concept of the water lily–inspired hierarchical structure
Fig. 2 Some examples of weekly forecasts (the number of the forecasts are reported on Table 1). Some examples of weekly forecasts (the number of the forecasts.

Fig. 2 Some examples of weekly forecasts (the number of the forecasts are reported on Table 1). Some examples of weekly forecasts (the number of the forecasts.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
HT synthesis of boronic acids using the building block approach

HT synthesis of boronic acids using the building block approach

Similar presentations

Ads by Google