Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture.

Published byDušan Horáček Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture."— Presentation transcript:

1 Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture.
Adhesion of water on two kinds of hot hydrophobic nanotexture. (A) SEM (scanning electron microscopy) image of a Glaco-coated brass substrate. Hydrophobic nanobeads deposited on the substrate provide a submicrometric roughness. Scale bar, 500 nm. (B) SEM picture of a dense array of nanocones (height, 115 nm; spacing, 52 nm) textured in silicon and coated by fluorosilanes. Scale bar, 200 nm. The picture is adapted from the work of Checco et al. (25). (C) Contact angle hysteresis Δcosθ of a water drop (Ω = 3.9 μl) on Glaco coating (a, blue data) and on nanocones (b, red data) as a function of the substrate temperature T. Philippe Bourrianne et al. Sci Adv 2019;5:eaaw0304 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture."

Similar presentations

Fig. 4 3D reconfiguration of liquid metals for electronics.

Fig. 4 3D reconfiguration of liquid metals for electronics.
Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 2 Reconfiguration of liquid metals into 3D structures.

Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.

Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.
Focus on the base of water drops placed on hot repellent substrates

Focus on the base of water drops placed on hot repellent substrates
Fig. 2 Adhesion of water on hot repellent materials.

Fig. 2 Adhesion of water on hot repellent materials.
Fig. 1 Water drops on hot hydrophilic and superhydrophobic materials.

Fig. 1 Water drops on hot hydrophilic and superhydrophobic materials.
Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)

Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)
Fig. 1 Pump-probe signatures of vermilion (red HgS), black HgS, and metallic Hg. Pump-probe signatures of vermilion (red HgS), black HgS, and metallic.

Fig. 1 Pump-probe signatures of vermilion (red HgS), black HgS, and metallic Hg. Pump-probe signatures of vermilion (red HgS), black HgS, and metallic.
Fig. 3 Oil, gas, and FP water variations with time.

Fig. 3 Oil, gas, and FP water variations with time.
Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.

Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 3 Electron PSD in various regions.

Fig. 3 Electron PSD in various regions.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
HT synthesis of boronic acids using the building block approach

HT synthesis of boronic acids using the building block approach

Similar presentations

Ads by Google