Presentation is loading. Please wait.

Presentation is loading. Please wait.

LTI no 27: Finger crushed 13/June/2000

Published byAlfred Johnston Modified over 5 years ago

Similar presentations

Presentation on theme: "LTI no 27: Finger crushed 13/June/2000"— Presentation transcript:

1 LTI no 27: Finger crushed 13/June/2000
Operator tried to remove the bolt from this cross-over flange. He lifted the very heavy assembly (55 kg) but had to drop it down again.

2 LTI no 27: Finger crushed 13/June/2000
The tip of his finger got trapped and crushed between the studbolt and the flange. He was transferred to Nizwa hospital for corrective surgery. He will be off work for at least 2 weeks. Auch !!!!

3 LTI no 27: Finger crushed 13/June/2000
What caused this LTI: 1) Operator tried to lift/move a load that was too heavy for him. He should have used a crane. 2) The operator failed to see the hazard of his finger being trapped in between the long bolt and the flange. Discuss in your team: - Do you ever lift heavy objects manually ? Why ? - How would you have removed the bolt ? - How can you “see” the hazard/danger of a task/job ?

Download ppt "LTI no 27: Finger crushed 13/June/2000"

Similar presentations

The injured party was attempting to tighten the nut when the Annular BOP was being lowered. LTI no 29: Finger crushed 25/June/2000 Auch !!!!

The injured party was attempting to tighten the nut when the Annular BOP was being lowered. LTI no 29: Finger crushed 25/June/2000 Auch !!!!
/t/ / I d/ /d/ Try Again Go on /t/ / I d/ /d/

/t/ / I d/ /d/ Try Again Go on /t/ / I d/ /d/
A small leak was found in the freon gas cooling circuits of this air- conditioning unit. A technician was called out to fix it LTI no 43: Tightening bolt.

A small leak was found in the freon gas cooling circuits of this air- conditioning unit. A technician was called out to fix it LTI no 43: Tightening bolt.
This helper has been told by his foreman to wait for him to help lift off this 50 kg drilling tool. He decides to check if the lifting cap is properly.

This helper has been told by his foreman to wait for him to help lift off this 50 kg drilling tool. He decides to check if the lifting cap is properly.
Windmills-Energy and Power Pre-lab. Building a Windmill This week you will be building a windmill from some common materials Your windmill’s job will.

Windmills-Energy and Power Pre-lab. Building a Windmill This week you will be building a windmill from some common materials Your windmill’s job will.
PINCH POINTS.

PINCH POINTS.
LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.

LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.
The rig mechanic was clearing a tangle (“birds nest”) in the crane wire. The wire was under tension. He was feeding the wire into the spooling guide sheave.

The rig mechanic was clearing a tangle (“birds nest”) in the crane wire. The wire was under tension. He was feeding the wire into the spooling guide sheave.
Recordable injury 3/23/07 What Happened: –Employee was using a pry bar between a 2”x4” wood block support & an I-beam. The wood block slipped out & the.

Recordable injury 3/23/07 What Happened: –Employee was using a pry bar between a 2”x4” wood block support & an I-beam. The wood block slipped out & the.
MNM Fatal 2005-34 Machinery Machinery November 18, 2005 (Tennessee) November 18, 2005 (Tennessee) Crushed Stone Operation Crushed Stone Operation Plant.

MNM Fatal Machinery Machinery November 18, 2005 (Tennessee) November 18, 2005 (Tennessee) Crushed Stone Operation Crushed Stone Operation Plant.
Power GCSE Physics. It is said that power corrupts, but actually it's more true that power attracts the corruptible. The sane are usually attracted by.

Power GCSE Physics. It is said that power corrupts, but actually it's more true that power attracts the corruptible. The sane are usually attracted by.
Learn from a fatal error 1 Work Stoppage 26 February 2001 “Learn from a Fatal Error ” 1.

Learn from a fatal error 1 Work Stoppage 26 February 2001 “Learn from a Fatal Error ” 1.
Which operation should be done first? 3 + 4 x 2.

Which operation should be done first? x 2.
MNM Fatal 2011-15 Powered Haulage Accident Powered Haulage Accident December 8, 2011 (Minnesota) December 8, 2011 (Minnesota) Crushed Stone Operation Crushed.

MNM Fatal Powered Haulage Accident Powered Haulage Accident December 8, 2011 (Minnesota) December 8, 2011 (Minnesota) Crushed Stone Operation Crushed.
There was a Problem when making up coupling. Could not properly engage the pipe thread. When struggled to undo the rig tongs, fingers got into wrong place.

There was a Problem when making up coupling. Could not properly engage the pipe thread. When struggled to undo the rig tongs, fingers got into wrong place.
Main contractor name – LTI# - Date of incident 1 LTI NO.DATECompanyINJURYDIRLTI NO.DATECompanyINJURYDIR LTI#0103/01/2016Gulf PetrochemicalFinger amputationOSD.

Main contractor name – LTI# - Date of incident 1 LTI NO.DATECompanyINJURYDIRLTI NO.DATECompanyINJURYDIR LTI#0103/01/2016Gulf PetrochemicalFinger amputationOSD.
Forklift operator and helper are trying to get this kelly (pipe) into the casing. Helper is giving hand signals to driver. LTI no 40: 1/Sept/00 Kelly casing.

Forklift operator and helper are trying to get this kelly (pipe) into the casing. Helper is giving hand signals to driver. LTI no 40: 1/Sept/00 Kelly casing.
PDO Incident First Alert – Galfar

PDO Incident First Alert – Galfar
PDO Incident First Alert – MB Petroleum

PDO Incident First Alert – MB Petroleum
Always use mechanical handling aids when carrying out a heavy lift

Always use mechanical handling aids when carrying out a heavy lift

Similar presentations

Ads by Google