1. BRACKET 1. CHANGE TO METRIC UNITS 2. TOP PLANE SKETCH AS SHOWN
CHANGE TO METRIC (MMGS)
FOR ALL PART DRAWINGS
1. CHANGE TO METRIC UNITS
2. TOP PLANE
SKETCH AS SHOWN
3. SKETCH AS SHOWN

2. LINES TANGENT TO THE CIRCLE - LOOK FOR TANGENT SYMBOLS
4. SKETCH AS SHOWN
5. TRIM
6. EXTRUDE BOSS/BASE 12.00mm

3. 7. SKETCH ON TOP SURFACE
8. EXTRUDE BOSS/BASE 20.00mm
9. NEW SKETCH ON SURFACE CIRCLE Ø36
10. EXTRUDE BOSS/BASE 12.00mm

4. 11. NEW SKETCH ON SURFACE
12. EXTRUDED CUT
12mm
13. REPEAT FOR OTHER SIDE
14. FILLET 3mm

5. SWEPT-CUT THREADS 17. FEATURES TAB CURVES HELIX AND SPIRAL
SETTINGS
15. NEW SKETCH ON SURFACE
16. REGENERATE
20. FEATURES TAB REFERENCE GEOMETRY PLANE
21. CLICK THE HELIX
CLICK THE END OF THE HELIX
19. REGENERATE

6. 22. NEW SKETCH ON PLANE1
23. REGENERATE
24. SWEPT CUT
25. SELECT THE PROFILE (TRIANGLE) SELECT THE PATH (HELIX)
26. HIDE HELIX LINE
EYE BALL
27. REPEAT FOR OTHER SIDE

7. PLACE DIMENSIONS EXACTLY WHERE SHOWN BELOW
*REPLACE # WITH ACTUAL DIMENSIONS*
NUMBER DRAWINGS AS SHOWN