1. ACT2 preliminary JSOLVER equilibria
C. Kessel, PPPL
ARIES Project Meeting, Jan 23-24, 2012, UCSD

2. JSOLVER preliminary solution to start modeling for this scenario
R = 6.75 m, a = 1.68 m, κ = 2.0, δ = 0.7, BT = 7.25 T
JSOLVER ASC Ip
IBS
ICD
n/nGr
n(0)/<n>
T(0)/<T>
li(1) βN

3. Here ILH ~ 2.5 MA, IIC/EC ~ 2.5-3 MA
So far, can find ballooning stable cases around βN ~ , BUT can not n=1 stable cases without a wall……still working on it
Need to drive significant current in inner regions, ρ < 0.4, IC or EC for on-axis, most likely EC for further out
Here ILH ~ 2.5 MA, IIC/EC ~ MA
ILH = 2.5 MA
IIC/EC = 3 MA
Combination of IC & EC

4. Work to do on ACT2
Finish JSOLVER analysis to identify ideal MHD stable preliminary configuration
Develop free-boundary equilibrium for other analyses
Begin developing TSC time-dependent analysis for ACT2, including heating and current drive analysis (TSC/TRANSP)
Begin making similar ELM and disruption analysis for heat loads for ACT2