2. Nyle’s orgins date back to 1977 when Donald Lewis patented the XDH Dehumidification system, which became the core of a very successful line of dehumidification lumber dryers for the hardwood market.

3. Today, Nyle Water Heating Systems LLC is America's only commercial heat pump water heater manufacturer with a 40-year track record of exclusively producing commercial and industrial refrigeration systems.
100% made in America and certified to UL 1995, Nyle heat pumps range from 25MBH-2,000MBH in heating capacity and are being utilized to produce domestic hot water for buildings such as Universities, Apartment Complexes, Laundry Facilities, Military Bases, etc.

4. Product Lines Geyser C-Series Commercial Water Heaters:
Air Source & Water Source configurations available
Heating capacity ranges from 25,000 – 250,000 BTUH
Cooling capacity ranges from 20,000 – 211,000 BTUH
Recovery rates up to 340 gallons per hour
Geyser CWM-Series Modular Commercial Water Source Heaters:
High capacity Water Source MODULAR configurations available
Heating capacity ranges from 270 MBTUH → 2,000 MBTUH
Cooling capacity ranges from 20 MBTUH → 1,700 MBTUH
Recovery rates from 323 to 2,584 gallons per hour

7. Air to Water & Water to Water
Nyle Heat Pump Water Heater Models
Air to Water & Water to Water
Water to Water Modular
C25……………………27,400 BTUH
C270WM………………..278,650 BTUH
C60……………………66,800 BTUH
C540WM………………..557,300 BTUH
C90……………………92,300 BTUH
C810WM………………..835,950 BTUH
C125…………...…….131,600 BTUH
C1080WM………….....1,114,600 BTUH
C185…………………185,600 BTUH
C1350WM………….....1,393,250 BTUH
C250…………………249,800 BTUH
C1620WM………….....1,671,900 BTUH
C1890WM………….....1,950,550 BTUH
C2160WM………….....2,229,200 BTUH
* Performance based on 75°F ambient air at 60% RH, or 75°F source water with entering water temperature of 100°F
* Performance based on 80°F source water with 70°F entering water temperature and 140°F leaving water temperature

8. Standard Unit Construction
Double Wall Stainless Steel Brazed Plate Heat Exchanger, for Potable Water Side (NSF 61 Approved)
Integrated Pump on Heated Side of System (NSF 61 Approved)
Aluminum Enclosed Cabinet
Nyle Gray Macropoxy (epoxy) paint, 6,500 hour Salt Fog Resistance Rating
Coated Evaporator Coil (air units only)
Single Wall Stainless Steel Brazed Plate Heat Exchanger, for Source Water Side
Standard Connection Points
Potable Water Inlet & Outlet
Source Water Inlet & Outlet (Water Source)
Source Air Intake & Exhaust (Air Source)
Relay Contacts for External Source Pump (Water Source)
Tank Temperature Probe
Unit Main Power at Rated Voltage
Condensation Drainage

9. Additional Options 5 Year Extended Compressor Warranty
Blower Option for Air Source Units, Desirable for Ducting Applications
Cold Ambient Air Kit for Air Source Units
PLC Controls (Standard on C185 and Above)
Modbus to BACnet Gateway
Fluorokem HS Urethane Outer Coating, 10 Yr Manufacturer Warranty
304 or 316 Stainless Steel Enclosed Cabinet
Compressor VFD for Load Varying Applications (where applicable)
Copper Evaporator Air Coil
Master Panel for Multi-Unit Applications

10. Applications HOTELS/RESORTS HOSPITALS APARTMENT BUILDINGS SCHOOLS
DORMATORIES
OFFICES
INDUSTRIAL
GEOTHERMAL
COMMERCIAL LAUNDRY
HYDRONIC HEATING
PRIMARY FUNCTION: POTABLE WATER
SECONDARY FUNCTION: WE COOL THE SOURCE WATER/AIR

11. Certifications TÜV SÜD Canada & USA C22.2 No.326-15 (UL 1995)
This certification ensures that the electrical and refrigeration systems have been throughly tested to ensure safe operation and that all fail safes have passed. This also means that Nyle consistently maintains the same level of quality for every Heat Pump produced. We test our products 100% to ensure safe operation and to ensure the customer has push-button instillation.
QPS Canada & USA
C22.2 No.14-10
This certification establishes that the control equipment has been properly selected and applied to the current application and that the correct safeguards are in place to prevent electrical hazards within the Heat Pumps.
NSF 61 – Observed by Nyle (National Sanitation Foundation)
Drinking Water System Components
We observe the NSF 61 standard by only using products certified for domestic water on the potable water side of the Heat Pump.

12. Air-Source Low Ambient Kit
C250A 40°F Ambient Air Temperature
Max. Amperage Draw (230V): 90.7 Amps
Heating Capacity = 154,200 H.COP = 3
Cooling Capacity = 114,500 C.COP = 2.25
C250A 35°F Ambient Air Temperature (W/Heating Elements)
Maximum Amperage Draw (230V): Amps
Heating Capacity = 154,200 H.COP = 1.44
Cooling Capacity = 114,500 C.COP = 1.07
Cool Dehumidified Air Out
Evaporator
Warm Source Air In
Evaporator
Heating Elements
Cool Dehumidified Air Out
Warm Source Air In
E.W.T. = 60°F
L.W.T. = 140°F

13. Building Management System (BMS) Integration
Allows Monitoring of
System call status
Individual unit operating status
Individual unit defrost cycle status
Individual unit alarm status
Individual unit run hours

14. Online Resources – Single Line Drawings

15. Online Resources - Layouts

16. Online Resources – Sizing Calculator

17. Online Resources – Webinar Training Series
July 15th
11:30a – 12:45p EDST
More dates to be announced soon!

26. C125A
System Recovery Rate at Rated Conditions: 202 GPH
Entering Water Temperature: 60F
Leaving Water Temperature: 140F
Ambient Temperature: 70F
Heating Capacity: 135,250 BTU/hr
Cooling Capacity: 104,250 BTU/hr
Power Input: 10.7 kW
Heating COP: 4.8
Cooling COP: 3.8
Combined COP: 8.6
(EACH)

28. C185W
System Recovery Rate at Rated Conditions: 2,018 GPH
Entering Water Temperature: 110F
Leaving Water Temperature: 120F
Source Water Temperature: 54F
Heating Capacity: 168,300 BTU/hr
Cooling Capacity: 117,500 BTU/hr
Power Input: 14.5 kW
Heating COP: 3.4
Cooling COP: 2.35
Combined COP: 5.75
(EACH)

29. C250A
System Recovery Rate at Rated Conditions: 393 GPH
Entering Water Temperature: 60F
Leaving Water Temperature: 140F
Ambient Temperature: 70F
Heating Capacity: 262,600 BTU/hr
Cooling Capacity: 207,100 BTU/hr
Power Input: 20 kW
Heating COP: 4.1
Cooling COP: 3.3
Combined COP: 7.4

32. Best in class COP - Up to 9.65
Up to 160°F LWT
NSF 61 Approved - No secondary approaches for maximum delivered water temperature for sanitary concerns
UL1995:2015
CSA C22.2
TUV/SUD Safety and Quality Certified
Factory service plans available
Optional 5-year compressor warranty
Optional Stainless-Steel Cabinet
Optional Copper Evaporator Coil
Flat plate HX options for a variety of applications such as pool heating

33. Thank you!
Ryan Hamilton
President