1. Multi-Gear Tire Lock

2. Outline
Background
Product Introduction
Installation

3. Background
Tires are one of the most important component for vehicle. In recent years, because the cost of material has raised up rapidly and the tires can easily be stolen and resold, the rate of losing tires becomes higher and higher.
In such cases, DEFEND GROUP develops a brand new product, which can prevent the tires from being stolen

4. Product Introduction
Use the combination of gears, which is hard for thieves to crack
The tire lock has multiple combinations structure
After installing, there will be 2 parts
Lock body  Installed on the tires
Gear-key  The lock body can’t be unlocked without the gear-key

5. Product Introduction Spec. of Tire Lock Features Specification Unit
Material
Stainless Steel 420J2 -
Type
Screw nut
Screw bolt
SET
Pitch
M12x1.25
M12*1.50 mm
Diameter 30
Lock body 63 g
Cover
6.07
Gear-key 70
Surface treatment
Chromium plating

6. Product Introduction
Tire Lock Diagram
Lock Body
Gear-Key

7. Installation
1. Use the socket wrench to slacken the original nut

8. Installation
2. Roll in the lock body

9. Installation
3. Use the gear-key and 21mm socket wrench to tight up the lock body

10. Installation
4.Use gear-key (bottom) to tight up the dust cover

11. Installation
5. Done

12. Thanks for your attention