1. Global Overview EA Deliverables for East Area Renovation
\\cern.ch\dfs\Workspaces\e\EastAreaRenovation\Work packages\EN-EA

2. Services 7 May 2019 EA Equipment Review EDMS # Description Where
Production Readiness
Shielding primary Area
Primary area
3D design on going
False Floor bldg. 251
Bldg 251
3D design done
Gas Supply for Experimental Area
Exp Areas
Gas needs identified -
Scaffolding ?
Cabling
T09 / T20 / b. 251,157,352
Decabling
Secondary area and controlled zones?
Done in 2018
Dismantling
7 May 2019
EA Equipment Review

3. Vacuum Components F61 + F62 vacuum needs evaluated
Stock available to do F61-F62 vacuum
F63 – F6D  no vacuum
T08  needs evaluated to be checked by Emile/Victor
T09
T10
T11
Vacuum needs under study
7 May 2019
EA Equipment Review

4. Magnets Supports 7 May 2019 EA Equipment Review 3D design 2D drawings
Production
HMQAD
A01
Support for Quadrupoles Q74L, Adjusting table
1 on F61
HMQAE.C01
C01
Support for Quadrupoles Q120, Adjusting concrete base, flat
2 on F62
C02
Support for Quadrupoles Q120, Adjusting concrete base, tilted 1,7 degree
1 on T09
C03
Support for Quadrupoles Q120, Adjusting concrete base, tilted 2 degree
1 on T10
HMQAF.C01
Support for Quadrupoles, Q100, Adjusting concrete base, flat
Support for Quadrupoles, Q100, Adjusting concrete base, tilted 3,3 degree
2 on T11
Support for Quadrupoles, Q100, Adjusting concrete base, tilted 2 degree
C04
Support for Quadrupoles, Q100, Adjusting concrete base, tilted 1,7 degree
HMQAG
Support for Quadrupoles, Q200L, Adjusting concrete base, flat
2 on T09 1 on T10
Support for Quadrupoles, Q200L, Adjusting system
2 on T08
HMQAH
M01
Support for Quadrupoles QDS or QFS, Adjusting metal base, tilted 2 degree
4 on T10
M02
Support for Quadrupoles QDS or QFS, Adjusting metal base, tilted 1,7 degree
4 on T09
M03
Support for Quadrupoles QFS, Adjusting metal base, flat
M04
Support for Quadrupoles QFS, Adjusting metal base, tilted 3,3 degree
HMQAJ
P01
Support for Quadrupoles QFS, plug-in and Adjusting system, tilted 3,3 degree
1 on T11
HMQAM
Support for Quadrupoles QFL, plug-in and Adjusting system, flat
HMQAN
Support for Quadrupoles QFL, Adjusting metal base,flat
HMBAC
Support for Bending magnets MCB, plug-in and Adjusting system, flat
2 in F63
HMBAD
Support for Bending magnets MCB, Adjusting system, flat
2 in F61 3 in T08
 HMBAE
Support for Bending magnets M100, Adjusting system, tilted 1,7 degree
1 in T09
A02
Support for Bending magnets M100, Adjusting system, tilted 2 degree
1 in T10
 HMBAF
Support for Bending magnets M200L, Adjusting concrete base, tilted 1,7 degree
2 on T09
Support for Bending magnets M200L, Adjusting concrete base, tilted 2 degree
2 on T10
Support for Bending magnets M200L, Adjusting concrete base, tilted 3.3 degree
 UNI
 Support for MDXL + CR200
2 on T08 (MDXL) 1 in T09 (MDXL) 1 on T10 (MDXL) 2 on F62 (CR200) ?
HMCAD
U01
Support for Bending magnets CR200, similar to universal support
1 on F61 (CR200)
HLMAA
Support for Multiple components, plug-in and adjusting system, flat
1 in T08 (for 2 magnets)
HLMAB
P02
Support for Multiple components, plug-in and adjusting system, tilted 1,7 degree
1 in T09 (for 2 magnet + TCX)
HLMAC
Support for Multiple components, adjusting system, flat
1 in F61
7 May 2019
EA Equipment Review

5. Equipment and Supports
Code
Description
Quantity and Location
Production Readiness
XCET
Cerenkov Counters
2 on T09 2 on T10
3D design on going
XTCX
Fixed collimator
1 on T09
3D design done, 2D drawings on going
HTCAA
Support XTCX 1
XCSV
Collimator 2 blocs Vertical
2 on T10 1 on T11
On stock
XCHV
Collimator 4 blocks
3 on T09 1 on T10
On stock but complete renovation to be done
UNI
Supports Collimators 7 ?
XCON
Absorber/converter
2 on T09 1 on T10
3D model and technical spec to be done
XSCI
Scintillator
2 on T09 (XSCI) 1 on T10 (XSCI)
1 on T11 (XSCI)
Given from BI
HLGAC
Support absorber/converter (MAUVE)
Available on stock for installation
XWCM
Multi wire proportional chamber
1 on T08
installed
HXWCM
Support XWCM
XION
Ionization Chamber
Installed
HXION
Support XION
BXBPF
Beam profile monitor for experimental areas (VESSEL)
2 on T09 1 on T10 1 on T11
Support BXBPF 4
Support BTV 5
Recovered ready for installation
HBCTB
Support beam current transformer BCTF
1 on F61
HBLSD
Support Spill mesurement LSD
HXSEC
Support XSEC
1 on F62
1 on F63
2 on T08
7 May 2019
EA Equipment Review

6. Baraques 3 control rooms for users of experimental areas
See presentation of Abou
7 May 2019
EA Equipment Review

7. Timeline Linear Planning created to follow EA deliverables: 7 May 2019
\\cern.ch\dfs\Workspaces\e\EastAreaRenovation\Work packages\EN-EA\Review Equipment EA _ 7 May 19
7 May 2019
EA Equipment Review

8. Thank you!