1. EA Deliverable Equipment for East Area Renovation
Giulia/Aboubakr

2. Cerenkov Counters - XCET
2 on T09 2 on T10
3D design on going
Meeting done to check the current situation  document on overview XCET to be circulated soon
EAST AREA:
4 XCET to be produced
4 bodies with supports already available
Windows to be defined
Procurement of mirrows? (recover the existing ones?)
Control Panel to be done (3D model to be finished)
Complete assembly with body chambers and windows to be assembled and welded by certified welder
Pressure test from HSE to be done
RESPONSIBLES?
Design:
Production:
Assembly:
7 May 2019
EA Equipment Review

3. Collimators and XTCX TCX: 3D design ready, drawings to be done Bard??
Fixed collimator
1 on T09
3D design done, 2D drawings on going (Bard)
HTCAA
Support XTCX 1
XCSV
Collimator 2 blocs Vertical
2 on T10 1 on T11
On stock
XCHV
Collimator 4 blocks
3 on T09 1 on T10 ?
UNI
Supports Collimators 7
To be checked in stock
TCX: 3D design ready, drawings to be done Bard??
Production with external company
Collimator 2 blocks: on stock
Collimator 4 blocks: on stock? renovation complete to be done (change motor, screws, bearing…..)
RESPONSIBLES?
Design:
Production:
Assembly:
7 May 2019
EA Equipment Review

4. XCON and XSCI
XCON
Absorber/converter
2 on T09 1 on T10
3D model and technical spec to be done
XSCI
Scintillator
2 on T09 (XSCI) 1 on T10 (XSCI)
1 on T11 (XSCI)
from BI
HLGAC
Support absorber/converter (MAUVE) 7
4 recovered from T09 and T10
3 on stock
XCON: 3D design to be done following interaction with physicists to decide a proper material and thickness
Technical specification to be done
Control SMM
Quantité de XSCI à installer sur chaque lignes ?
T9 : 2,
T10 : 1 ou 2 ?
T11 : 1
RESPONSIBLES?
Design:
Production:
Assembly:
7 May 2019
EA Equipment Review

5. Wire and Ionization Chambers
XWCM
Multi wire proportional chamber
1 on T08
installed
HXWCM
Support XWCM
XION
Ionization Chamber
Installed
HXION
Support XION
Already installed, no modifications
Name to be inserted in the naming portal and then registerd on layout database
Gas supply for XWCM on T08 to be redone
Second XION to be installed in T08?
7 May 2019
EA Equipment Review

6. Beam Profile Monitors - XBPF
BXBPF
Beam profile monitor for experimental areas (VESSEL)
2 on T09 1 on T10 1 on T11
3D design on going
UNI
Support BXBPF 4
To be checked in stock?
3D model ready
2D drawigns ready
Production 4 vessels to be done with external company
Assembly chez nous
2 windows + 2 flanges for device to be procured? (EA-VIDE)
Inteface with adjusting base to be produced (angle regulation)
RESPONSIBLES?
Design: Vincent
Production:
Assembly:
7 May 2019
EA Equipment Review

7. Supports Recoverd as they are (stocked @ CHARM), ready to be installed?
Support BTV 5
Recovered ready for installation
HBCTB
Support beam current transformer BCTF
1 on F61
HBLSD
Support Spill mesurement LSD
HXSEC
Support XSEC
1 on F62
1 on F63
2 on T08
Recoverd as they are CHARM), ready to be installed
Name to be inserted in the naming portal and then registerd on layout database
(BTV names to be checked)
BCT recovered from linac 2 (BI resposible)
On F62 BTV support name PSZBTVMC0028
LSD vacuum chamber to be cheked!
7 May 2019
EA Equipment Review

8. Open Points 7 May 2019 EA Equipment Review
From: Erwan Harrouch Sent: mardi 30 avril :49 To: Sebastien Evrard Johannes Bernhard Michael Lazzaroni Cc: Giulia Romagnoli Subject: FW: Resources for urgent actions: BLMs
Bonjour à tous,
Lors de la revue du TDR avec Jocelyn, deux points en suspens ont été levé :
Quantité de BLM à installer : Est-ce que les télescopes sur la cibles seront effectivement remplacés par des BLMs ? Est-ce que les BLMs sur les lignes primaires seront installés ?(Cf. mail ci-dessous)
Quantité de XSCI à installer sur chaque lignes ?
T9 : 2,
T10 : 1 ou 2 ?
T11 : 1
Merci
Erwan
7 May 2019
EA Equipment Review

9. Thank you!