1. Utgangspunkt for PowerPoint presentasjoner
Omega
Utgangspunkt for PowerPoint presentasjoner

2. Quantity Management (QMS)
Designed for Company / Client verification of contractors measurement

3. Introduction
Currently the Quantity Mgmt module contains two sub modules
Contract Evaluation
Measurement Verification
Sutable for time and material contracts
Price elements for man-hour norm and material unit rate (Compensation Codes)
Quantity * Norms and Rates = Man-Hours, Labor Cost, Material Cost and Total Cost

4. Time and Material Contract Example
Typical Compensation format in Norway

5. Evaluation Compare bidders Analyze norms and rates
FEED MTO
Compare bidders
Analyze norms and rates
Scenarios / Normalizing
Identify «tactical priced norms and rates»
Compensation
Codes
Scenarios
Bidders
Norms and Rates
Compare Reports

6. Contract Evaluation (Demo)
Compensation Codes & CBS
Scenarios
Bidders
Compare Bids
Norms and Rates Analyzer

7. Measurement
Tool for Company’s verification of Contractor’s measurement and management of quantity update estimates that provides a continuous interpretation of Scope of Work into man-hours and cost through to final account. Deviations, cost changes and inconsistencies can be identified and managed at the earliest possible stage. The tool is divided in two main areas:
Quantity Update – Estimates in line with Weight Reporting
Quantity Measurement – A/IFC and As-built measurement

8. Quantity Update Project Duration 100% Scope Estimate IFC Quantities
As-Built Quantities
100% Scope

9. Quantity Update Demo Estimate (Forecast) Scenarios
Can be activated / deactivated in estimate
Archive
Estimate and MTO development
Scenarios

10. Measurement Approaches
100% As-Built Verification (Heavy workload)
Spot Check of As-Built
Continuous verification -> Feedback to Contractor

11. Measurement data flow example
Always use contractor’s measurement 100%, incl. errors and missing data.
Contractor
100% transmissions, Incl.
Errors, disagreements e.a
Feedback
Agreed measurement adjustments
Company
Disagreements
Own measurement on the few items we definitive disagree on

12. Measurement Simplified Model
Contractor a
Contractor’s
MTO 1
Quantity Update 2 b
Compensation Codes 3
MTO 4
Estimate 5
Client

13. Measurement (Demo)
MTO
Information Library
Reporting

14. What is there to check ? Reimbursable items
(Not be measured)
Tag or articles installed by
vendors on equipment
packages
Compensation code
Material Take Off
(MTO) on document’s
Article weight
QtyMgmt
Void item’s on
documents and index
Article length
Doc
MTO
Art
Clarifications
Duplications in articles,
documents or MTO
(X) Item's that should
be included in other
articles with a general
compensation code
Tag or articles that should
be measured in other
phases (Hook-up)
ATS-MC work paid both in measure and invoice