1. 847(B) PDB Uninstallation guide
4/11/2018

2. 1. Remove 4 fasteners on top cover and lift up from rear

3. 2. Remove rear PWSs and HDDs
SC847 JBOD
SC847 server

4. 3. Remove Ethernet port carrier by 4 fasteners (JBOD)

5. 4. Remove 5 fasteners (JBOD)

6. 5. Remove 1 fastener

7. 6. Pull out rear partition (JBOD)

8. 6. Pull out rear partition (Server)
Warning: Remove all cable connections before pulling out partition
Pull the tab at the same time

9. 7. Remove below 3 fasteners

10. 8. Push PDB assembly toward inside and lift

11. 9. Reverse the steps to install the PDB
Caution
When push back rear chassis, make sure the shoulder screw goes through motherboard.
Correct
Wrong