1. Discard “Old” Gasket Remove original gasket
Will not be needed with new insulated gasket
Gasket (metal)

2. Exploded View M6-1.0x40 Screw -2885916 17 mm Spacer -2885891
Insulated Gasket (metal)
Insulated Gasket (paper)
Thermal Isolator

3. Final Assembly – Thermal Isolator
Cross section view showing assembly of thermal isolator
Nested in counter bore of casting

4. Torque Sequence
Tighten cap screws by hand in either sequence below until gasket is seated properly in the decomp flange
Torque cap screws to spec (8±2Nm) in either sequence below

5. Final Assembly
Final assembly shows extra mounting holes

6. Downloading to a Aftertreatment Diesel Exhaust Fluid Controller
Reference Early Field Notification E09110 for INSITE and INLINE instructions

7. Downloading to a Aftertreatment Diesel Exhaust Fluid Controller