Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 3 Measurement of SOT efficiency (θDL,m) from ST-FMR.

Published byMay Hall Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 3 Measurement of SOT efficiency (θDL,m) from ST-FMR."— Presentation transcript:

1 Fig. 3 Measurement of SOT efficiency (θDL,m) from ST-FMR.
Measurement of SOT efficiency (θDL,m) from ST-FMR. (A) Schematics of measurement setup. The moment m in Py follows an elliptical precession route around the direction of H. It is influenced by two orthogonal torques τFL and τDL. Top right shows the optical image of the device and electrode (dark color). (B) Voltage spectra of L10-IrMn (22)/Py (17) measured from 8 to 12 GHz with nominal input power of 18 dBm. (C) Typical fitting of Vmix at 9 GHz. Vsym and Vasym correspond to the symmetric and antisymmetric components, respectively. (D) Fitting of Kittel equation. (E) θDL,m of L10-IrMn, p-IrMn, and Pt. The error bar describes 1 SD over at least five devices. Jing Zhou et al. Sci Adv 2019;5:eaau6696 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 3 Measurement of SOT efficiency (θDL,m) from ST-FMR."

Similar presentations

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.
Fig. 4 3D reconfiguration of liquid metals for electronics.

Fig. 4 3D reconfiguration of liquid metals for electronics.
Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 1 Characterization of the device structure.

Fig. 1 Characterization of the device structure.
Fig. 4 Ballistic simulation of BP FETs.

Fig. 4 Ballistic simulation of BP FETs.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)

Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 3 Saturation velocity of BP FETs.

Fig. 3 Saturation velocity of BP FETs.
Fig. 1 NP-free Ch-CNC droplets.

Fig. 1 NP-free Ch-CNC droplets.
Fig. 3 Electron PSD in various regions.

Fig. 3 Electron PSD in various regions.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 2 Influence of the Roadmap Epigenomics Program on the field of epigenomics research. Influence of the Roadmap Epigenomics Program on the field of.

Fig. 2 Influence of the Roadmap Epigenomics Program on the field of epigenomics research. Influence of the Roadmap Epigenomics Program on the field of.
Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.

Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 2 Stratigraphic profile of the Area 15 excavation block showing the diagnostic cultural materials and components alongside the stratigraphic sequence.

Fig. 2 Stratigraphic profile of the Area 15 excavation block showing the diagnostic cultural materials and components alongside the stratigraphic sequence.

Similar presentations

Ads by Google