Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 2 Fabrication process and optical property characterization of MTC device. Fabrication process and optical property characterization of MTC device.

Published byMariah Blair Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 2 Fabrication process and optical property characterization of MTC device. Fabrication process and optical property characterization of MTC device."— Presentation transcript:

1 Fig. 2 Fabrication process and optical property characterization of MTC device.
Fabrication process and optical property characterization of MTC device. (A) The fabrication process of MTC device that consisted of a chamber for sodium acetate solution and the transparent microheater prepared by acid-assisted laser sintering of Cu nanoparticle paste. (B) The digital images and (C) UV-vis analysis of the transparency shift after phase change for each chamber thickness (photo credit: Hyunmin Cho and Jinhyeong Kwon, Seoul National University). Hyunmin Cho et al. Sci Adv 2019;5:eaav4916 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution License 4.0 (CC BY).

Download ppt "Fig. 2 Fabrication process and optical property characterization of MTC device. Fabrication process and optical property characterization of MTC device."

Similar presentations

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.
Fig. 4 Altitudinal distributions of ice thickness change (m year−1) for the 650 glaciers. Altitudinal distributions of ice thickness change (m year−1)

Fig. 4 Altitudinal distributions of ice thickness change (m year−1) for the 650 glaciers. Altitudinal distributions of ice thickness change (m year−1)
Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 5 Front and side views of our autofocal prototype.

Fig. 5 Front and side views of our autofocal prototype.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 4 Complete separation of water and solute after stable and efficient solar evaporation. Complete separation of water and solute after stable and efficient.

Fig. 4 Complete separation of water and solute after stable and efficient solar evaporation. Complete separation of water and solute after stable and efficient.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.

Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 2 The glucose binding and charge-switch study.

Fig. 2 The glucose binding and charge-switch study.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 1 Experimental apparatus used to train and test free-flying bees on their capacity to learn addition and subtraction. Experimental apparatus used.

Fig. 1 Experimental apparatus used to train and test free-flying bees on their capacity to learn addition and subtraction. Experimental apparatus used.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.
Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.
Fig. 1 Reference-fixing experiment, setup.

Fig. 1 Reference-fixing experiment, setup.
Mechano-thermo-chromic device with supersaturated salt hydrate crystal phase change by Hyunmin Cho, Jinhyeong Kwon, Inho Ha, Jinwook Jung, Yoonsoo Rho,

Mechano-thermo-chromic device with supersaturated salt hydrate crystal phase change by Hyunmin Cho, Jinhyeong Kwon, Inho Ha, Jinwook Jung, Yoonsoo Rho,

Similar presentations

Ads by Google