1. IEEE 1900.7 White Space Radio Draft Development Process
November 2005
doc.: IEEE /1051r0
22/08/2019
IEEE White Space Radio Draft Development Process
Date: ; Berlin, Germany
Authors:
Notice: This document has been prepared to assist IEEE DYSPAN SC. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE DYSPAN SC.
Patent Policy and Procedures: The contributor is familiar with the IEEE Patent Policy and Procedures < ieee802.org/guides/bylaws/sb-bylaws.pdf>, including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being developed within IEEE DYSPAN SC. If you have questions, contact the IEEE Patent Committee Administrator at
Slide 1
Mujtaba (Agere), Petranovich (Conexant), Fischer (Broadcom), Stephens (Intel) et. al.

2. 22/08/2019
Abstract
The purpose of this contribution is to facilitate the discussion on the Draft Development Process document
Slide 2

3. General Process Preparatory phase Draft development phase
22/08/2019
General Process
Preparatory phase
Draft development phase
WG letter ballot
Sponsor ballot
Publication
Slide 3

4. Preparatory Phase Radio regulations Use cases General requirements
22/08/2019
Preparatory Phase
Radio regulations
Use cases
General requirements
Channel model
Selection of topology
Selection of multiple access method and modulation
Slide 4

5. Draft Development Phase
22/08/2019
Draft Development Phase
Reference model
Radio interface ID
Interface with WS DB
Interface with and a
Interface with
PHY layer
MAC sublayer
Convergence sublayer
Security sublayer
Cognitive plane
Slide 5

6. Draft Development Phase
22/08/2019
Draft Development Phase
At the beginning it would be beneficial to develop ToC
Then, two directions are usual
Option 1
Full proposals for each key section
Downselection with merging
Voting is performed only during downselection process
Option 2
Step-by-step contributions
Voting is performed for each separate contribution
Slide 6

7. Potential Schedule Sep 28-29, 2011 F2F meeting, Berlin, Germany
22/08/2019
Potential Schedule
Sep 28-29, 2011 F2F meeting, Berlin, Germany
Call for contributions
Use cases
General requirements
Channel model
Topology
Multiple access method and modulation
Dec 12-14, 2011 F2F meeting, Scottsdale, AZ, USA
Finalize
Initial presentations
Slide 7

8. Potential Schedule March 2012 F2F meeting, Osaka, Japan
22/08/2019
Potential Schedule
March 2012 F2F meeting, Osaka, Japan
Finalize
Topology
Multiple access method and modulation
Tentative ToC
Draft development process
Call for contributions
Draft
June/July 2012 F2F meeting, Grenoble, France
First contributions to the Draft
Slide 8