1. EECE6017 Lab 6 HPS with GSensor and LED
Prelab Activities:
Complete the homework given for Lab 4
Go Through the training “DE0-Nano-SoC_My_First_HPS.pdf” from the Lab manual
Download the SoC EDS Design Suite from - Refer System Requirements in the DE0-Nano- SoC_My_First_HPS.pdf before starting the lab
Demonstrate the my_first_hps project in the DE0-Nano-SoC_v.1.1.0_SystemCD\Demonstrations\SoC\my_first_hps folder
Work to be done during this lab:
Turn in assignments from lab 4 (if you have not completed these, turn them in at the beginning of lab)
Questions on Lab 5 : Discuss the program as given in my_first_hps sample and come up with questions if there are any.
Demonstrate advanced HPS Examples provided in the DE0-Nano-SoC_v.1.1.0_SystemCD
Revise team member assignments (if necessary).

2. EECE6017 Lab 6 HPS with GSensor and LED
Read Chapter 6 - Examples For FPGA from DE0-Nano-SoC_User_manual.pdf
Go through 6.1 and 6.3 to understand the Software development procedure to use the peripheral connected to HPS and demostrate the project hps_gsensor from Demonstrations\SOC folder (instruction are given in the user manual).
Use Altera SoC EDS to build the software with HPS. Please refer to Chapter 5 "Running Linux on the DE0-Nano-SoC board" from the DE0- Nano-SoC_Getting_Started_Guide.pdf to run Linux on DE0-Nano-SoC board.
Be sure to understand the I2C Driver used in this exercise
Show the output in the terminal window, the gsensor X, Y and Z Orientation values

3. Points to remember
Make sure to select correct path for Altera SoC EDS installation

4. Homework: Study about ARM AMBA® AXITM bus bridges from its datasheet
From the instructions given in the manual, demonstrate the sample application, my_first_hps_fpga in board
Learn to use Qsys tools with this exercise