Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 4 Short-channel 2L-OFET for cutoff frequency measurement.

Published byFerenc Veres Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 4 Short-channel 2L-OFET for cutoff frequency measurement."— Presentation transcript:

1 Fig. 4 Short-channel 2L-OFET for cutoff frequency measurement.
Short-channel 2L-OFET for cutoff frequency measurement. (A) Schematic image of the fabricated 2L-OFET. (B) Micrograph of the 2L-OFET with a channel length of 3 μm. (C) Transfer and (D) output properties of the fabricated 2L-OFET with L/W = 3/750 μm. (E) Schematic diagram of the setup for the cutoff frequency measurement. (F) Estimation of the cutoff frequency of the 2L-OFET. Gain is defined as 20 log(ΔID/ΔIG), where ΔIG and ΔID are the amplitudes of the output gate and drain currents, respectively. The cutoff frequency is extracted from the frequency of the gain equal to zero. Akifumi Yamamura et al. Sci Adv 2018;4:eaao5758 Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 4 Short-channel 2L-OFET for cutoff frequency measurement."

Similar presentations

Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 4 Ballistic simulation of BP FETs.

Fig. 4 Ballistic simulation of BP FETs.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)

Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)
Fig. 3 Projected gains in MCP.

Fig. 3 Projected gains in MCP.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 3 Saturation velocity of BP FETs.

Fig. 3 Saturation velocity of BP FETs.
Fig. 3 Electron PSD in various regions.

Fig. 3 Electron PSD in various regions.
Fig. 2 Some examples of weekly forecasts (the number of the forecasts are reported on Table 1). Some examples of weekly forecasts (the number of the forecasts.

Fig. 2 Some examples of weekly forecasts (the number of the forecasts are reported on Table 1). Some examples of weekly forecasts (the number of the forecasts.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.

Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.

Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.
Fig. 3 Swarm material properties.

Fig. 3 Swarm material properties.
Fig. 5 Conservation of m6A in mammals.

Fig. 5 Conservation of m6A in mammals.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.

Similar presentations

Ads by Google