1. Hardware needs (ARCS)
Current ARCS capabilities at both sites should be able to keep up with production assuming software changes
Automatic I-V curves, xml file generation, configuration files
After M800 production, hybrid thermal cycler needed at UCSB (with the necessary ARCS components)
External interlocks, PS, etc. very homebrew and will take significant effort of Sam Burke to complete
Mechanical structure begun in machine shop
FNAL will need full ARCS capabilities at similar time
Components from Aachen
3 ARC clamshells in queue in machine shop

2. Hardware needs (DAQ)
Assume for near term that FED-MUX software lacking, so maximum of 4 modules can be tested in Vienna box
Due to FED-MUX software problems, rod assembly stands will initially need 2 FED each

3. Hardware needs (4 slot burn-in)
Power
LV distribution ready (both PS and crate)
HV system just integrated
LT software CAEN A1303  CAEN A128 HS  CAEN A332
Electrometers at both sites
Needs to make LIMO-to-DI/O cable adapter
PC boards
4 PCI + 1 ISA + ethernet +1 com port
UCSB has computer, not sure about FNAL
All DAQ PC boards in hand
All stand-alone boards in hand except for hybrid-to-vutri version D
3 in-hand (also needed for ARCS); Expect delivery of ~10 in 2-3 weeks

4. Hardware needs (4 slot burn-in) cont
Cold box infrastructure
2 Vienna cold boxes in hand
Final modifications for leak tightness and interlock underway
Only 1 of 2 Torino interlock boxes available
Schedule for second set not clear
Both sites have necessary external chillers
Set of 10 cold box plates for both sites in UCSB machine shop
See Patrick Gartung’s talk at tracker week for details

5. Hardware needs (Rod Assembly)
Rod assembly hardware in less stable situation
Many assembly jigs/tools in very preliminary stages
Rod assembly rotation table, rod handling tool and all other tools should be shipped with a rod to UCSB soon
Testing electronics for rods in similar situation
Power
LV power supplies from CERN late
Expect in 2-3 months
Need to order CAEN HV PC controllers (A1303) for both sites
Need 2 Electrometers per site to measure HV current accurately
VERY difficult to get

6. Hardware needs (Rod Assembly)
PC boards
Now need 5 PCI slot + 1 ISA slot +ethernet + COM port + LV DI/O card (if necessary)
Neither site has such a computer
1 TSC
2 FED
2 OEC (SS4 rods only)
2 DI/O cards

7. Hardware needs (Rod Assembly)
To get first site read-out rods need the following hardware
1 LV PS
1 A1303 CAEN controller
1 PC (5 PCI + 1 ISA + ethernet + 1 com + LV DI/O (maybe))
2 Electrometers
1 DI/O card
1 OEC
LV PS, A1303, PC, and electrometers all may be long lead time items.