1. Belgium INSPIRE dashboard How does it work?
Please run the animations (F5 key on PC keyboards)

2. Using Data Metadata only
(MIG-T preferred method)
CSW
MD Data A : MD_DigitalTransferOptions, Protocol :
WMS  linkage URL 1
WFS  linkage URL 2
MD Data B : MD_DigitalTransferOptions, Protocol :
WFS  linkage URL 3
MD Data C : MD_DigitalTransferOptions , Protocol :
WMS  linkage URL 4
MD Data D : MD_DigitalTransferOptions, Protocol :
Neither WMS nor WFS MD A B C D
WMS OK KO
WFS OK KO

3. Using WMS/WFS Metadata layers Currently applied by European harvester
CSW
MD Data A  file1
MD Data B  file2
MD Data C  file3
MD Data D  (no file)
MD WMS1
OperatesOn Layer6: MD A
OperatesOn Layer7: MD C
MD WFS1
OperatesOn Layer1: MD A
OperatesOn Layer2: MD B
OperatesOn Layer3: MD G
MD WFS2
OperatesOn Layer4: MD D
OperatesOn Layer5: MD K MD A B C D
WMS
WMS1 Layer6 = OK
No WMS Layer = KO
WMS1 Layer7 = OK
WFS
WFS1 Layer1 = OK
WFS1 Layer2 = OK
No WFS layer = KO
WFS2 Layer4 = OK

4. Calling WMS/WFS getcapabilities CSW
MD Data A  file1
MD Data B  file2
MD Data C  file3
MD Data D  (no file)
MD WMS1
MD WFS1
OperatesOn Layer1: MD A
OperatesOn Layer2: MD B
OperatesOn Layer3: MD G
MD WFS2
OperatesOn Layer4: MD D
OperatesOn Layer5: MD K
WMS1
GetCapabilities
Layer6: MD A
Layer7: MD C
WFS1
GetCapabilities
Layer1: MD A
Layer2: MD B
Layer3: MD G
WFS2
GetCapabilities
Layer4: MD D
Layer5: MD K MD A B C D
WMS
WMS1 Layer6 = OK
No WMS Layer = KO
WMS1 Layer7 = OK
WFS
WFS1 Layer1 = OK
WFS1 Layer2 = OK
No WFS layer = KO
WFS2 Layer4 = OK