1. Best Practice Replacing
CLEANCLICKER 750 cartridge

2. Case for using the CLEANCLICKER 750 cleaners
1.25mm CLEANCLICKER 750 Cleaners
Cleans LC/PC, LC/APC, Harden LC
Cleaner P/N: CCU125
Refill Cartridge Pack P/N: CCR125
2.5mm CLEANCLICKER 750 Cleaners
Cleans SC/PC, SC/APC, ST, FC/UPC, FC/APC, E2000/APC. E2000/UPC, OptiTap-style
Cleaner P/N: CCU250
Refill Cartridge Pack P/N: CCR250
750 cleaning capacity versus 500 of IBC-One Clicks (use fewer cleaners)
Refillable cartridges for lowering customer’s cost per clean
Cleans unmated connectors by flipping lid on cap and connectors in adapters
Push engagement and audible pop after engagement is complete
Locking feature to prevent waste

3. How to identify full and empty cartridges
Periodically view the pay off spool window to verify remaining cleaning strand
The engagements will become stiffer in the final 15 to 10 engagements
The operator will see a vivid colored tape in window at the end of life
White strand
Full Cartridge
Green Tape
Empty Cartridge

4. How to identify full and empty cartridges
White strand
Full Cartridge
Blue tape
Empty Cartridge

5. 3 Steps to remove the cartridge
Place end cap into the back of the handle
Step 2:
Slide the cartridge arrow to LOCK on handle

6. 3 Steps to remove the cartridge
Grab gray cartridge and pull back while holding the orange
handle to release the cartridge for the handle’s mounting ears
Mounting ears

7. For More Information Contact:
Brian Teague
Product Line Manager – Sticklers Fiber Optics C: