Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 2 Structural design of an F-DSSC.

Published byMarsha Matthews Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 2 Structural design of an F-DSSC."— Presentation transcript:

1 Fig. 2 Structural design of an F-DSSC.
Structural design of an F-DSSC. (A) Schematic diagram and (B) photograph (scale bar, 1 cm) of a single F-DSSC, consisting of N719 dye–adsorbed TiO2 nanotube arrays on a Ti wire as a working electrode and a Pt-coated carbon fiber as a CE in an I−/I3−-based electrolyte. (C) Low-magnification and (D) high-magnification SEM images of the TiO2 nanotube arrays on the Ti wire [scale bars, 100 μm (C) and 100 nm (D)]. (E) J-V curve of a single F-DSSC (inset shows the Nyquist plot of an F-DSSC, which is measured under VOC with frequencies ranging from 100 kHz to 10 MHz). (F) Normalized current density of the single F-DSSC at different bending angles (0° to 180°) (insets show the photograph of a single F-DSSC at different bending angles). Zhen Wen et al. Sci Adv 2016;2:e Copyright © 2016, The Authors

Download ppt "Fig. 2 Structural design of an F-DSSC."

Similar presentations

Hierarchical MoS 2 tubular structures internally wired by carbon nanotubes as a highly stable anode material for lithium-ion batteries by Yu Ming Chen,

Hierarchical MoS 2 tubular structures internally wired by carbon nanotubes as a highly stable anode material for lithium-ion batteries by Yu Ming Chen,
A Flexible Supercapacitor with High True Performance

A Flexible Supercapacitor with High True Performance
Wei-Ran Huang, Zhen He, Jin-Long Wang, Jian-Wei Liu, Shu-Hong Yu 

Wei-Ran Huang, Zhen He, Jin-Long Wang, Jian-Wei Liu, Shu-Hong Yu 
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.

Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.
Fig. 5 In vivo MIP imaging of lipid and protein in C. elegans.

Fig. 5 In vivo MIP imaging of lipid and protein in C. elegans.
Fig. 1 Characterization of decellularized zECM.

Fig. 1 Characterization of decellularized zECM.
Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Reconfiguration of liquid metals into 3D structures.

Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 1 Characterization of the device structure.

Fig. 1 Characterization of the device structure.
Fig. 1 High-resolution printing of liquid metals.

Fig. 1 High-resolution printing of liquid metals.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 3 Evolution of absorber with annealing.

Fig. 3 Evolution of absorber with annealing.
Fig. 2 General properties of Nafion/PVDF membranes.

Fig. 2 General properties of Nafion/PVDF membranes.
Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.

Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.
Fig. 3 Mechanism and result of the super-resolution RLP.

Fig. 3 Mechanism and result of the super-resolution RLP.
Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture.

Fig. 3 Adhesion of water on two kinds of hot hydrophobic nanotexture.
Fig. 2 CdS thin films with three different shapes.

Fig. 2 CdS thin films with three different shapes.
Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.

Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.
Fig. 1 Experimental schematic and setup.

Fig. 1 Experimental schematic and setup.
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.

Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.

Similar presentations

Ads by Google