1. The 5-year Integrated Plan is built upon this logic diagram
Target Fabrication and Injection Logic Flow
Preliminary
Target
Designs
specified
Target design
Work (NRL)
Foam shells for
Direct Drive
The 5-year Integrated Plan is built upon this logic diagram
Characterization
Of Foam Shells
Gold Overcoat for
Rad Preheat Target
Demonstrate
Integrated
Fill, Layer and
Thermal Exposure
Fabricate
Single Prototype
Direct Drive Target
Decision on
Baseline Direct
Drive Target
Demonstrate
Pilot-Scale Shell
Production
Fluidized Bed
Mass Production
Target
Fabrication
Tasks
Foam Shell
Mass Production
Mass Production
Layering Methods
Fill/Injector
Demonstration
Low inventory
Filling methods
Cryogenic Target
Handling
Target Thermal
Response
Target Thermal
Response
Engineering Design
of Cryo Injector
Fill system Demo
Target
Injection
Tasks
Target Injection
Accuracy & Track
Target Injection
Accuracy & Track
Target Property
Measurements
Target Property
Measurements
Electromagnetic
Accelerator
Electromagnetic
Accelerator
Demonstrate
Tracking
Accuracy
Target Fab, Fil
And Injection
Demonstrated
and ready for IRE
Experimental
Injector Design
Experimental
Injector Design
Tracking
Accuracy
Demonstrated

2. Summary of LANL/GA target injection tasks

3. 3.6.1 Coordinate target tasks with other IFE components
Overall Purpose: Participate in and host workshops for cross-communication; address action items, follow-up with technical evaluations - $75K
GA has hosted previous workshops to facilitate communication between target designers, target fabricators, target injection, chamber design, and safety/environmental issues
Deliverable: Document discussions, conclusions, and action items in workshop summaries