1. Dynamc Transfer Capability Task Force 28 Jan 2011 Phase 1 Update
Gordon Dobson-Mack
DTC TF Chair
Tel:

2. Agenda
Purpose
Phase 1 Challenges
Phase 1 Deliverables
Next Steps

3. Propose
“ Develop a technical consensus on how to facilitate increased Dynamic Transfers without compromising system reliability ”

4. Phase 1 Challenges DTC definition? Nature of the variability?
How much is too much?
Analogies for MW change, frequency, volume & ramp rate
Emerging Issues
Reliability Based Control Webinar 4

5. Work Process
Phase 1 5

6. Phase 1 Deliverables Phase 1 to wrap up end of February;
Will not have a DTC Methodology
Stretch Objective: Aiming to have a Phase 1 Report 6

7. Phase 1 Deliverables DRAFT TABLE OF CONTENTS: Executive Summary
Introduction
Nature of the emerging Dynamic Transfer Problem
Define requirements for a robust DTC Methodology
Sensitivities on Existing Methodologies
Initial Steps towards a DTC Limit Methodology
Emerging Issues and Threats
Next Steps
Conclusions
Appendices 7

8. DTC TF Membership BPA: Brian Tuck, Edison Elizeh, Tim Smith,
BCH: Bob Cielen, Steven Pai,
CAISO: Jim Price,
IPCO: Orlando Ciniglio,
Avista: Rich Hydzik,
NWE: Chuck Stigers, Ray Brush
PAC: Sanman Rokade,
PGE: Don Johnson,
PSE: Alex Berres, Shengli Huang, Joe Seabrook, Jason Yedinak
Pwx: Gordon Dobson-Mack,
SCL: Robin Cross,
TANC: Shawn Matchim, Abbas Abed
MSR: Dave Arthur, David Olivares
Columbia Grid: Marv Landauer, Jeff Miller
Northern Tier: Rich Bayless
WECC: Branden Sudduth
OPUC: Matt Muldoon